Board overview
The board has the following features and interface:
- Zynq Ultrascale+ XCZU3EG
- 4GB or 8GB DDR4
- Mini Display port
- MIPY camera interface
- USB-C power in
- 2x USB-C 3.0 Host/OTG
- 1x USB-C JTAG/UART
- Audio codec
- 40-pin Raspberry Pi connector, 3x Grove (1x PS, 2x PL)
- 1x Pmod+ (2x Pmod)
- 8x White user LEDs
- 8x Slide switches
- 4x User pushbuttons
- 4x RGB LEDs
- 2x Green user LEDs (PS)
- 10k Potentiometer
AUP-ZU3 board features and interfaces
Block Diagram
PS/PL connections
Zynq UltraScale+ MPSoC device
The AUP-ZU3 has a Zynq Ultrascale+ XCZU3EG-2SFVC784E with an ARM Cortex A53 quad-core Processing System (PS) and Ultrascale+ Programmable Logic (PL).
This device has the following resources:
| System Logic Cells (K) | 154 |
|---|---|
| CLB Flip-Flops (K) | 141 |
| CLB LUTs (K) | 71 |
| Total Block RAM (Mb) | 7.6 |
| DSP Slices | 360 |
Peripherals are connected to PS and PL as follows:
PS connected
- 4GB or 8GB DDR4 depending on board variant
- Micro SD card port
- Mini Display port
- WiFi + Bluetooth
- 2x 2-Stacked USB 3.0 hub
- USB 3.0 Composite device (Micro USB 3.0 port)
- TPM Pmod
- I2C/PMBus
- UART
- Grove (1)
PL connected
- HDMI In and HDMI Out
- Audio codec
- FMC LPC
- Dual SYZYGY interfaces
- 40-pin Raspberry Pi connector
- Grove (2)
- Pmod (2)
- CSI
- XADC
- 4x Switches, 4x User pushbuttons, 4x LEDs, 2x RGB LEDs
Copyright© 2025 Advanced Micro Devices