Versal Custom Platform Creation Tutorial

Step 4: Test the Platform

Test 1: Read Platform Info

With Vitis environment setup, platforminfo tool can report XPFM platform information.

We can verify hardware configuration (clocks, memory) and software configuration (domain) are set as expected.

Show Log
 # Find the XPFM file
 cd pfm
 find . -name "*.xpfm"
 cd <xpfm directory>  
 # Report Platform Info
 platforminfo vck190_custom.xpfm
 ==========================
 Basic Platform Information
 ==========================
 Platform:           vck190_custom
 File:               .../03_Edge_VCK190/ref_files/step3_pfm/platform_repo/vck190_custom/export/vck190_custom/vck190_custom.xpfm
 Description:        
 A custom platform VCK190 platform
    

 =====================================
 Hardware Platform (Shell) Information
 =====================================
 Vendor:                           xilinx
 Board:                            name
 Name:                             name
 Version:                          0.0
 Generated Version:                2021.1
 Hardware:                         1
 Software Emulation:               1
 Hardware Emulation:               1
 Hardware Emulation Platform:      0
 FPGA Family:                      versal
 FPGA Device:                      xcvc1902
 Board Vendor:                     xilinx.com
 Board Name:                       xilinx.com:vck190:2.2
 Board Part:                       xcvc1902-vsva2197-2MP-e-S

 =================
 Clock Information
 =================
 Default Clock Index: 0
 Clock Index:         0
    Frequency:         200.000000
 Clock Index:         1
    Frequency:         100.000000
 Clock Index:         2
    Frequency:         300.000000

 ==================
 Memory Information
 ==================
 Bus SP Tag: DDR
 =============================
 Software Platform Information
 =============================
 Number of Runtimes:            1
 Default System Configuration:  vck190_custom
 System Configurations:
 System Config Name:                      vck190_custom
 System Config Description:               vck190_custom
 System Config Default Processor Group:   xrt
 System Config Default Boot Image:        standard
 System Config Is QEMU Supported:         1
 System Config Processor Groups:
    Processor Group Name:      aiengine
    Processor Group CPU Type:  ai_engine
    Processor Group OS Name:   aie_runtime
    Processor Group Name:      xrt
    Processor Group CPU Type:  cortex-a72
    Processor Group OS Name:   linux
 System Config Boot Images:
    Boot Image Name:           standard
    Boot Image Type:           
    Boot Image BIF:            vck190_custom/boot/linux.bif
    Boot Image Data:           vck190_custom/xrt/image
    Boot Image Boot Mode:      sd
    Boot Image RootFileSystem: 
    Boot Image Mount Path:     /mnt
    Boot Image Read Me:        vck190_custom/boot/generic.readme
    Boot Image QEMU Args:      vck190_custom/qemu/pmc_args.txt:vck190_custom/qemu/qemu_args.txt
    Boot Image QEMU Boot:      
    Boot Image QEMU Dev Tree:  
 Supported Runtimes:
 Runtime: OpenCL

Test 2: Run a PL acceleration application

To verify the platform functionality, we will create an acceleation project with PL kernel. We will use Vitis built-in Vector Addition template to do this test.

  1. Launch Vitis

    mkdir -p ref_files/step4_verify
    cd ref_files/step4_verify
    vitis -workspace ./ &
    

    Close the welcome tab after Vitis launches.

  2. Add custom platform

    • Select menu Xilinx -> Add custom platform…

    • Click add button

    • Select the directory that step3 generates. For example ref_files/step3_pfm/platform_repo

    • Click OK

  3. Create vector addition application on the custom platform

    • Select menu File -> New -> Application Project.

    • Go through the welcome page and click Next.

    • On Platform page, select vck190_custom platform in the platform list. Click Next.

    • Set Application project name to vadd, target processor psv_cortexa72_SMP. Click Next.

      missing image

    • Input Sysroot path (step3_pfm/sw_comp/sysroots/aarch64-xilinx-linux), RootFS path (step3_pfm/sw_comp/rootfs.ext4) and Kernel Image path (step3_pfm/sw_comp/Image). These components were prepared in step 3. Click Next.

      missing image

    • Select template Vector Addition. Click Finish.

  4. Build the vector addition application for hardware

    • Select vadd_system project

    • Click the drop down of Build hammer icon on tool bar, select Hardware. Alternatively, this step can be done by selecting Active Build Configuration to Hardware and click the build icon.

    • It takes some time to build hardware. Finally Vitis will generate sd_card.img in vadd_system/Hardware/package directory.

  5. (Optional) Build the vector addition application for hardware emulation

    • Select vadd_system project

    • Click the drop down of Build hammer icon on tool bar, select Emulation-HW. Alternatively, this step can be done by selecting Active Build Configuration to Emulation HW and click the build icon.

    • If it pops-up a dialogue to ask whether to clean the project, select Don’t clean.

Test the Application on Hardware

  1. Copy vadd_system/Hardware/package/sd_card.img to local if you build the project on a remote server or virtual machine.

  2. Program sd_card.img to SD card. Refer to AR#73711 for detailed steps.

    Note: The programmed SD card has two partitions. FAT32 partition with boot components; EXT4 partition with Linux root file system. Windows system by default cannot see the contents of EXT4 partition.

    Note: Please eject the SD card properly from the system after programming it.

  3. Insert the SD card and boot the VCK190 board with SD boot mode (SW1[4:1] = “1110”: OFF, OFF, OFF, ON) and power on.

    Note: Refer to VCK190 Evaluation Board User Guide for details about boot mode.

  4. Connect to UART console

  5. Launch the test application from UART console

    cd /mnt/sd-mmcblk0p1
    ./vadd binary_container_1.xclbin
    

    Note: Depends on the device tree version, the mount point of the SD card could be /mnt/sd-mmcblk1p1. Please try this path if /mnt/sd-mmcblk0p1 is not available on your system.

  6. Expected print on UART console

Show Log
root@petalinux:/mnt/sd-mmcblk0p1# ./vadd binary_container_1.xclbin
[   34.747622] [drm] Pid 770 opened device
[   34.751501] [drm] Pid 770 closed device
[   34.759710] [drm] Pid 770 opened device
[   34.763568] [drm] Pid 770 closed device
[   34.767554] [drm] Pid 770 opened device
Loading: 'binary_container_1.xclbin'
[   35.023095] [drm] get section AIE_METADATA err: -22
[   35.023119] [drm] zocl_xclbin_read_axlf 1ec78909-b5e7-4db2-9fe9-22fd362b09a4 ret: 0
[   35.029555] [drm] bitstream 1ec78909-b5e7-4db2-9fe9-22fd362b09a4 locked, ref=1
[   35.037397] [drm] No ERT scheduler on MPSoC, using KDS
[   35.049806] [drm] 9 non-zero interrupt-id CUs out of 10 CUs
[   35.049852] [drm] scheduler config ert(0)
[   35.055426] [drm]   cus(1)
[   35.059435] [drm]   slots(16)
[   35.062132] [drm]   num_cu_masks(1)
[   35.065095] [drm]   cu_shift(16)
[   35.068578] [drm]   cu_base(0xa4010000)
[   35.071799] [drm]   polling(0)
[   35.075658] [drm] bitstream 1ec78909-b5e7-4db2-9fe9-22fd362b09a4 unlocked, ref=0
TEST PASSED
[   35.079775] [drm] bitstream 1ec78909-b5e7-4db2-9fe9-22fd362b09a4 locked, ref=1
[   35.099312] [drm] bitstream 1ec78909-b5e7-4db2-9fe9-22fd362b09a4 unlocked, ref=0
[   35.116279] [drm] Pid 770 closed device

Note: the [   35.116279] [drm] messages are print from XRT for debugging purpose. It only shows up on UART. It will now print on ssh. This debugging message can be turned off by turning down the system dmesg reporting level.

echo "4" > /proc/sys/kernel/printk

(Optional) Test the Application on Hardware Emulation

  1. Launch Emulator for PS

    • Click menu Xilinx -> Start/Stop Emulator

    • Select Project: vadd_system, Configuration: Emulation-HW

    Launch Emulator for Vadd Project

    • Click Start

    • There will be prints on Emulation Console.

    • Wait for it to boot Linux. The wait window will disappear after it detects Linux boot successfully.

  2. Launch PL emulation

    • Right click vadd_system, select Run as -> Run Configurations

    • Select vadd_system-Default

    • Change Build Configuration to Emulation-HW

    • Click Run

    • Check run result

    Vitis Emulation Vadd Result

  3. Stop the Emulator

    • Click menu Xilinx -> Start/Stop Emulator

    • Click Stop button

What Just Happened?

Vitis runs PS emulation in QEMU, PL and AIE emulation in XSIM. They can communicate with each other. When running the emulation, Vitis downloads executable and xclbin to Remote Working Directory and launch it.

Test 3: Run an AIE + PL acceleration application project

To verify the platform functionality, we will create a project with AIE + PL kernel and PS application and run it on VCK190 board.

  1. Create vector addition application on the custom platform

    • Select menu File -> New -> Application Project.

    • Go through the welcome page and click Next.

    • On Platform page, select vck190_custom platform in the platform list. Click Next.

    • Set application name plaie, target processor psv_cortexa72_SMP. Click Next.

    • Input Sysroot path, RootFS path and Kernel Image. Click Next.

    • Select template AI Engine System Design Examples -> AI Engine, PL and PS System Design. Click Finish.

  2. Build the vector addition application for hardware

    • Select plaie_system project

    • Click the drop down of Build hammer icon on tool bar, select Hardware. Alternatively, this step can be done by selecting Active Build Configuration to Hardware and click build icon.

  3. (Optional) Build the vector addition application for hardware emulation

    • Select plaie_system project

    • Click the drop down of Build hammer icon on tool bar, select Emulation-HW. Alternatively, this step can be done by selecting Active Build Configuration to Emulation HW and click build icon.

    • If it pops-up a dialogue to ask whether to clean the project, select Don’t clean.

  4. After a successful build, sd_card.img is generated in plaie_system/Hardware/package and plaie_system/Hardware/package_no_aie_debug directory. They include all files in sd_card directory in the first FAT32 partition and contents of rootfs.ext4 in second EXT4 partition. The differences are the sd_card.img in package directory has a package parameter enable_aie_debug=1. It’s used for debugging. The one in package_no_aie_debug can work for free running.

Test the Application on Hardware

  1. Copy the sd_card.img from plaie_system/Hardware/package_no_aie_debug directory to local, if the project is run on a server or virtual machine.

    Note: Vitis will generate images with aie_debug enabled and disabled. The image with aie_debug disabled will run freely; The image with aie_debug enabled will halt AI Engine and wait for the debugger to connect to it.

  2. Program sd_card.img to the SD card. Refer to AR#73711 for detailed steps.

    Note: The programmed SD card has two partitions. FAT32 partition with boot components; EXT4 partition with Linux root file system. Windows system by default cannot see the contents of EXT4 partition.

    Note: Please eject the SD card properly from the system after programming it.

  3. Insert the SD card and boot the VCK190 board with SD boot mode (SW1[4:1] = “1110”: OFF, OFF, OFF, ON) and power on.

    Note: Refer to VCK190 Evaluation Board User Guide for details about boot mode.

  4. Setup XRT runtime environment and launch test application from UART console

    cd /mnt/sd-mmcblk0p1
    ./plaie binary_container_1.xclbin
    
  5. Expected print on UART console

Show Log
root@petalinux:/mnt/sd-mmcblk0p1# ./plaie binary_container_1.xclbin
[  381.642589] [drm] Pid 693 opened device
[  381.646455] [drm] Pid 693 closed device
[  381.654748] [drm] Pid 693 opened device
[  381.658589] [drm] Pid 693 closed device
[  381.662601] [drm] Pid 693 opened device
Loading: 'binary_container_1.xclbin'
[  381.928588] [drm] zocl_xclbin_read_axlf 8ff25a1d-3722-4718-bae4-e65ef3313a0f ret: 0
[  381.934195] [drm] bitstream 8ff25a1d-3722-4718-bae4-e65ef3313a0f locked, ref=1
[  381.941892] [drm] No ERT scheduler on MPSoC, using KDS
[  381.954244] [drm] Interrupt is not enabled for at least one kernel. Fall back to polling mode.
[  381.954419] [drm] 12 non-zero interrupt-id CUs out of 13 CUs
[  381.963051] [drm] CU ffffff02 is free-running.
[  381.968711] [drm] scheduler config ert(0)
[  381.973149] [drm]   cus(3)
[  381.977152] [drm]   slots(16)
[  381.979853] [drm]   num_cu_masks(1)
[  381.982813] [drm]   cu_shift(16)
[  381.986292] [drm]   cu_base(0xa4010000)
[  381.989515] [drm]   polling(1)
[  381.993375] [drm] bitstream 8ff25a1d-3722-4718-bae4-e65ef3313a0f unlocked, ref=0
TEST PASSED
[  381.998058] [drm] bitstream 8ff25a1d-3722-4718-bae4-e65ef3313a0f locked, ref=1
[  382.022624] [drm] bitstream 8ff25a1d-3722-4718-bae4-e65ef3313a0f unlocked, ref=0
[  382.045158] [drm] Pid 693 closed device

(Optional) Test the Application on Hardware Emulation

  1. Launch Emulator for PS

    • Click menu Xilinx -> Start/Stop Emulator

    • Select Project: plaie_system, Configuration: Emulation-HW

    • Click Start

    • There will be prints on Emulation Console.

    • Wait for it to boot Linux. The wait window will disappear after it detects Linux boot successfully.

  2. Launch PL and AIE emulation

    • Right click plaie_system, select Run as -> Run Configurations

    • Select plaie_system-Launch

    • Click Run

    Emulation Result of PLAIE Project

  3. Stop Emulator

    • Click menu Xilinx -> Start/Stop Emulator

    • Click Stop button

Congratulations now you’ve created a custom platform that PL acceleration kernel and AIE applications can work on it.

In next chapter, we’ll list some frequently encountered problems and frequently asked questions. Please take a look if you’d like to understand more of platform creation.

Copyright© 2021 Xilinx