.. index:: pair: class; xf::dsp::aie::fir::interpolate_fract_asym::fir_interpolate_fract_asym_graph
.. _doxid-classxf_1_1dsp_1_1aie_1_1fir_1_1interpolate__fract__asym_1_1fir__interpolate__fract__asym__graph:
.. _cid-xf::dsp::aie::fir::interpolate_fract_asym::fir_interpolate_fract_asym_graph:
template class xf::dsp::aie::fir::interpolate_fract_asym::fir_interpolate_fract_asym_graph
==========================================================================================
.. toctree::
:hidden:
.. code-block:: cpp
:class: overview-code-block
#include "fir_interpolate_fract_asym_graph.hpp"
Overview
~~~~~~~~
fir_resampler is an Asymmetric Fractional Interpolation FIR filter
These are the templates to configure the Asymmetric Fractional Interpolation FIR class.
.. rubric:: Parameters:
.. list-table::
:widths: 20 80
*
- TT_DATA
-
describes the type of individual data samples input to and output from the filter function. This is a typename and must be one of the following:
int16, cint16, int32, cint32, float, cfloat.
*
- TT_COEFF
-
describes the type of individual coefficients of the filter taps.
It must be one of the same set of types listed for TT_DATA and must also satisfy the following rules:
* Complex types are only supported when TT_DATA is also complex.
* 32 bit types are only supported when TT_DATA is also a 32 bit type,
* TT_COEFF must be an integer type if TT_DATA is an integer type
* TT_COEFF must be a float type if TT_DATA is a float type.
*
- TP_FIR_LEN
- is an unsigned integer which describes the number of taps in the filter.
*
- TP_INTERPOLATE_FACTOR
- is an unsigned integer which describes the interpolation factor of the filter. TP_INTERPOLATE_FACTOR must be in the range 3 to 16.
*
- TP_DECIMATE_FACTOR
- is an unsigned integer which describes the decimation factor of the filter. TP_DECIMATE_FACTOR must be in the range 2 to 16. The decimation factor should be less that the interpolation factor and should not be divisible factor of the interpolation factor.
*
- TP_SHIFT
-
describes power of 2 shift down applied to the accumulation of FIR terms before output.
TP_SHIFT must be in the range 0 to 61.
*
- TP_RND
-
describes the selection of rounding to be applied during the shift down stage of processing. TP_RND must be in the range 0 to 7 where
* 0 = floor (truncate) eg. 3.8 Would become 3.
* 1 = ceiling e.g. 3.2 would become 4.
* 2 = round to positive infinity.
* 3 = round to negative infinity.
* 4 = round symmetrical to infinity.
* 5 = round symmetrical to zero.
* 6 = round convergent to even.
* 7 = round convergent to odd.
Modes 2 to 7 round to the nearest integer. They differ only in how they round for values of 0.5.
*
- TP_INPUT_WINDOW_VSIZE
-
describes the number of samples in the window API used for input to the filter function.
The number of values in the output window will be TP_INPUT_WINDOW_VSIZE multipled by TP_INTERPOLATE_FACTOR and divided by TP_DECIMATE_FACTOR.
In the instance this would lead to a fraction number of output samples, this would be rounded down.
Note: Margin size should not be included in TP_INPUT_WINDOW_VSIZE.
*
- TP_CASC_LEN
-
describes the number of AIE processors to split the operation over.
This allows resource to be traded for higher performance. TP_CASC_LEN must be in the range 1 (default) to 9.
*
- TP_USE_COEFF_RELOAD
-
allows the user to select if runtime coefficient reloading should be used.
When defining the parameter:
* 0 = static coefficients, defined in filter constructor,
* 1 = reloadable coefficients, passed as argument to runtime function.
Note: when used, optional port: ``port coeff;`` will be added to the FIR.
*
- TP_NUM_OUTPUTS
-
sets the number of ports to broadcast the output to.
Note: when used, optional port: ``port