Embedded Runtime Library

XRT Embedded Runtime definition

Header file ert.h defines data structures used by Emebdded Runtime (ERT) and XRT xclExecBuf() API.

struct ert_packet

Definition

struct ert_packet {
  union {unnamed_union};
  uint32_t data;
};

Members

{unnamed_union}

anonymous

data

count number of words representing packet payload

struct ert_start_kernel_cmd

Definition

struct ert_start_kernel_cmd {
  union {unnamed_union};
  uint32_t cu_mask;
  uint32_t data;
};

Members

{unnamed_union}

anonymous

cu_mask

first mandatory CU mask

data

count-1 number of words representing interpreted payload

Description

The packet payload is comprised of reserved id field, a mandatory CU mask, and extra_cu_masks per header field, followed by a CU register map of size (count - (1 + extra_cu_masks)) uint32_t words.

struct ert_dpu_data

interpretation of data payload for ERT_START_DPU

Definition

struct ert_dpu_data {
  uint64_t instruction_buffer;
  uint32_t instruction_buffer_size;
  uint32_t chained;
};

Members

instruction_buffer

address of instruction buffer

instruction_buffer_size

size of instruction buffer in bytes

chained

number of following ert_dpu_data elements

Description

The ert_dpu_data is prepended to data payload of ert_start_kernel_cmd after any extra cu masks. The payload count of the ert packet is incremented with the size (words) of ert_dpu_data elements preprended to the data payload.

The data payload for ERT_START_DPU is interpreted as fixed instruction buffer address along with instruction count, followed by regular kernel arguments.

struct ert_init_kernel_cmd

Definition

struct ert_init_kernel_cmd {
  union {unnamed_union};
  uint32_t cu_mask;
  uint32_t data;
};

Members

{unnamed_union}

anonymous

cu_mask

first mandatory CU mask

data

count-9 number of words representing interpreted payload

Description

this command initializes CUs by writing CU registers. CUs are represented by cu_mask and extra_cu_masks.

cu_run_timeout the configured CU timeout value in Microseconds

setting to 0 means CU should not timeout

cu_reset_timeout the configured CU reset timeout value in Microseconds

when CU timeout, CU will be reset. this indicates CU reset should be completed within the timeout value. if cu_run_timeout is set to 0, this field is undefined.

The packet payload is comprised of reserved id field, 8 reserved fields, a mandatory CU mask, and extra_cu_masks per header field, followed by a CU register map of size (count - (9 + extra_cu_masks)) uint32_t words.

struct ert_configure_cmd

Definition

struct ert_configure_cmd {
  union {unnamed_union};
  uint32_t slot_size;
  uint32_t num_cus;
  uint32_t cu_shift;
  uint32_t cu_base_addr;
  uint32_t ert:1;
  uint32_t polling:1;
  uint32_t cu_dma:1;
  uint32_t cu_isr:1;
  uint32_t cq_int:1;
  uint32_t cdma:1;
  uint32_t dsa52:1;
  uint32_t data;
};

Members

{unnamed_union}

anonymous

slot_size

command queue slot size

num_cus

number of compute units in program

cu_shift

shift value to convert CU idx to CU addr

cu_base_addr

base address to add to CU addr for actual physical address

ert

1 enable embedded HW scheduler

polling

1 poll for command completion

cu_dma

1 enable CUDMA custom module for HW scheduler

cu_isr

1 enable CUISR custom module for HW scheduler

cq_int

1 enable interrupt from host to HW scheduler

cdma

1 enable CDMA kernel

dsa52

1 reserved for internal use

data

addresses of num_cus CUs

struct ert_configure_sk_cmd

Definition

struct ert_configure_sk_cmd {
  union {unnamed_union};
  uint32_t num_image;
};

Members

{unnamed_union}

anonymous

num_image

number of images

struct ert_unconfigure_sk_cmd

Definition

struct ert_unconfigure_sk_cmd {
  union {unnamed_union};
  uint32_t start_cuidx;
  uint32_t num_cus;
};

Members

{unnamed_union}

anonymous

start_cuidx

start index of compute units

num_cus

number of compute units in program

struct ert_abort_cmd

Definition

struct ert_abort_cmd {
  union {unnamed_union};
  uint64_t exec_bo_handle;
};

Members

{unnamed_union}

anonymous

exec_bo_handle

The bo handle of execbuf command to abort

struct ert_validate_cmd

Definition

struct ert_validate_cmd {
  union {unnamed_union};
};

Members

{unnamed_union}

anonymous

struct ert_access_valid_cmd

Definition

struct ert_access_valid_cmd {
  union {unnamed_union};
};

Members

{unnamed_union}

anonymous

ERT_WORD_SIZE ()

Parameters

ERT_STATUS_REGISTER_ADDR ()

Parameters

Description

MicroBlaze write, host reads. MB(W) / HOST(COR)

ERT_CU_DMA_ENABLE_ADDR ()

Parameters

Description

on a specific CU. MB selects a free CU on which the command can run, then writes the 1<<CU back to the command slot CU mask and writes the slot index to the CU DMA REGISTER. HW is notified when the register is written and now does the DMA transfer of CU regmap map from command to CU, while MB continues its work. MB(W) / HW(R)

ERT_CQ_SLOT_SIZE_ADDR ()

Parameters

Description

configurable per xclbin. MB(W) / HW(R)

ERT_CU_OFFSET_ADDR ()

Parameters

Description

example a 64K regmap is 2^16 so 16 is written to the CU_OFFSET_ADDR. MB(W) / HW(R)

ERT_CQ_NUMBER_OF_SLOTS_ADDR ()

Parameters

Description

MB(W) / HW(R)

ERT_CU_BASE_ADDRESS_ADDR ()

Parameters

Description

CU_BASE_ADDRESS is the address of the first CU. MB(W) / HW(R)

ERT_CQ_BASE_ADDRESS_ADDR ()

Parameters

Description

MB(W) / HW(R)

ERT_CU_ISR_HANDLER_ENABLE_ADDR ()

Parameters

Description

CU interrupts. When a CU interrupts (when done), hardware handles the interrupt and writes the index of the CU that completed into the CU_STATUS_REGISTER (HW(W)/MB(COR)) as a bitmask

ERT_CQ_STATUS_ENABLE_ADDR ()

Parameters

Description

MB to indicate the presense of a new command in some slot. The slot index is written to the CQ_STATUS_REGISTER (HOST(W)/MB(R))

ERT_NUMBER_OF_CU_ADDR ()

Parameters

Description

xclbin. This is an optimization that allows HW to only check CU completion on actual CUs.

ERT_HOST_INTERRUPT_ENABLE_ADDR ()

Parameters

Description

When enabled writing to STATUS_REGISTER causes an interrupt in HOST. MB(W)

ERT_INTC_ADDR ()

Parameters

Description

This value is per hardware BSP (XPAR_INTC_SINGLE_BASEADDR)

ERT_CUISR_LUT_ADDR ()

Parameters

ERT_EXIT_CMD ()

Parameters

ERT_HLS_MODULE_IDLE ()

Parameters

ERT_INTC_IPR_ADDR ()

Parameters

Description

CU are enabled