Command Line Tool

Xilinx Container Runtime provides command line tool to show detailed Xilinx devices info on the host. For some Xilinx FPGA cards, like U30, there is more than one device. As shown in the following example, these two devices belong to the same Xilinx U30 card, with the card index 0. And you will be getting the indices of these two devices by ‘lsdevice’ command.

List Card(s)

xilinx-container-runtime lscard
CardIndex       SerialNum       DeviceBDF           UserPF                  MgmtPF                  ShellVersion
0               XFL1YV0M20E0    0000:00:1e.0        /dev/dri/renderD128                             xilinx_u30_gen3x4_base_1
0               XFL1YV0M20E0    0000:00:1f.0        /dev/dri/renderD129                             xilinx_u30_gen3x4_base_1

List Device(s)

xilinx-container-runtime lsdevice
DeviceIndex     SerialNum       DeviceBDF           UserPF                  MgmtPF                  ShellVersion
0               XFL1YV0M20E0    0000:00:1e.0        /dev/dri/renderD128                             xilinx_u30_gen3x4_base_1
1               XFL1YV0M20E0    0000:00:1f.0        /dev/dri/renderD129                             xilinx_u30_gen3x4_base_1

Start a Container

Based on previous information, environment variables can be set at the container starting process, so that the corresponding devices will be injected into the container.

Either ‘XILINX_VISIBLE_DEVICES’ or ‘XILINX_VISIBLE_CARDS’ can be passed, and acceptable values include ‘all’ and comma separated integers, like ‘0,1’.

xilinx-container-runtime spec
mkdir rootfs
docker export $(docker create xilinx/xilinx_runtime_base:alveo-2021.1-ubuntu-20.04) | tar -C rootfs -xvf -
XILINX_VISIBLE_DEVICES=all xilinx-container-runtime run xrt_base