.. _sys_req: System Requirements =================== Xilinx Accelerator Card ----------------------- 1. VCU1525 Host Platform ------------- x86_64 host system with at least one Gen 3x16 PCIe slot and minimum 64GB RAM on same CPU node for 2K queues. For VM testing, host system must support virtualization and it must be enabled in the BIOS. Host System Configuration ------------------------- Linux QDMA Driver release is verified on following Host system configuration for PF and VF functionality +--------------------------+-------------------------------------------------------------+ | Host System | Configuration Details | +==========================+=============================================================+ | Operating System | Ubuntu 18.04 LTS | +--------------------------+-------------------------------------------------------------+ | Linux Kernel | 4.15.0-23-generic | +--------------------------+-------------------------------------------------------------+ | RAM | 64GB on local NUMA node | +--------------------------+-------------------------------------------------------------+ | Hypervisor | KVM | +--------------------------+-------------------------------------------------------------+ | Qemu Version | QEMU emulator version 2.5.0 (Debian 1:2.5+dfsg-5ubuntu10.15)| +--------------------------+-------------------------------------------------------------+ **Notes**: - When assigning the 2048 queues to PFs users shall make sure the host system configuration meets the requirement given above. If users want to enable iommu(iommu=on), make sure suffiecient memory available to support the 2048 queues. If the memory is not sufficient, ``dma_alloc_coherent`` kernel call may fail and driver might not work. - QEMU is a hosted virtual machine monitor which emulates the machine's processor through dynamic binary translation and provides a set of different hardware and device models for the machine, enabling it to run a variety of guest operating systems.This is used to emulate the virtual machines and enables the users to attach virtual functions to virtual machines. Guest System Configuration -------------------------- Linux QDMA VF Driver release is verified on following Guest system configuration for VF functionality ========================= ================================== Guest System(VM) Configuration Details ========================= ================================== Operating System Ubuntu 18.04 LTS Linux Kernel 4.15.1-20-generic RAM 4GB Cores 4 ========================= ================================== Supported Linux Distributions ----------------------------- Linux QDMA Driver is supported on the following linux distributions +-------------------------+---------------------+----------------+ | Linux Distribution | Version | Kernel Version | +=========================+=====================+================+ | CentOS |7.6-1810 (RHEL 7.6) |3.10.0-957 | | +---------------------+----------------+ | |7.7-1908 (RHEL 7.7) |3.10.0-1062 | +-------------------------+---------------------+----------------+ |Fedora |29 |4.18.16 | | +---------------------+----------------+ | |30 |5.0.9-301 | | +---------------------+----------------+ | |31 |5.3.7-301 | +-------------------------+---------------------+----------------+ |Ubuntu |16.04 |4.15.0-101 | | +---------------------+----------------+ | |18.04 |4.15.0-20 | | +---------------------+----------------+ | |20.04 |5.4.0-31 | +-------------------------+---------------------+----------------+ Supported Kernel Versions ------------------------- Linux QDMA Driver is verified on following kernel.org Linux kernel versions +-------------------------+-----------------+ |Kernel.org | Kernel Version | +=========================+=================+ | | 3.16.66 | | +-----------------+ | | 4.4.196 | | +-----------------+ | | 4.9.174 | | +-----------------+ | | 4.14.117 | | +-----------------+ | | 5.4 | +-------------------------+-----------------+ The following kernel functions shall be included in the OS kernel version being used. Make sure that these functions are included in the kernel. - Timer Functions - PCIe Functions - Kernel Memory functions - Memory and GFP Functions Notes about GCC versions ------------------------- **Issue#1**: For Kernel Images > 4.9.199 with CONFIG_STACK_VALIDATION=y and GCC version > 8 compiler throws spurious warnings related to sibling calls and frame pointer save/setup. **Solution#1**: To suppress these warnings enable the OBJECT_FILES_NON_STANDARD option in linux/drv/Makefile **Issue#2**: Compilation failure on GCC 9 **Solution#2**: GCC 9 release adds the -Wmissing-attributes warnings (enabled by -Wall), which trigger for all the initialization/cleanup_module aliases in the kernel (defined by the module_init/exit macros), ending up being very noisy. These aliases point to the __init/__exit functions of a module, which are defined as __cold (among other attributes). However, if the aliases themselves do not have the __cold attribute, this causes compilation failure for driver if used with Kernel Versions < 3.16.66 mentioned in the supported kernels list above or if the Kernel Source doesn't have the fix for this which are there in the long term releases.