Overview

This file demonstrates how to use the xaxicdma driver on the Xilinx AXI CDMA core (AXICDMA) to transfer packets in scatter gather transfer mode through interrupt.

This example assumes that the system has an interrupt controller.

To see the debug print, you need a Uart16550 or uartlite in your system, and please set "-DDEBUG" in your compiler options for the example, also comment out the "#undef DEBUG" in xdebug.h. You need to rebuild your software executable.

Make sure that MEMORY_BASE is defined properly as per the HW system.

MODIFICATION HISTORY:

Ver   Who  Date     Changes



1.00a jz   07/27/10 First release
2.01a rkv  01/28/11 Changed function prototype of XAxiCdma_SgIntrExample to
                       a function taking arguments interrupt instance,device
                       instance,device id,device interrupt id.
               Added interrupt support for Cortex A9
2.01a srt  03/05/12 Modified interrupt support for Zynq.
               Added V7 DDR Base Address to fix CR 649405.
                       Modified Flushing and Invalidation of Caches to fix CRs
               648103, 648701.
2.02a srt  03/01/13 Updated DDR base address for IPI designs (CR 703656).
4.1   adk  01/07/16 Updated DDR base address for Ultrascale (CR 799532) and
               removed the defines for S6/V6.
4.3   ms   01/22/17 Modified xil_printf statement in main function to
           ensure that "Successfully ran" and "Failed" strings are
           available in all examples. This is a fix for CR-965028.
      ms   04/05/17 Modified Comment lines in functions to
                    recognize it as documentation block for doxygen
                    generation of examples.
4.4   rsp  02/22/18 Support data buffers above 4GB.Use UINTPTR for storing
                    and typecasting buffer address(CR-995116).
4.5   rsp  03/10/18 Fix compilation error in CheckData function when DEBUG
                    mode is enabled.
                    Reset error and done states before starting the DMA.
4.6   rsp  09/13/19 Fix cache maintenance ops for source and dest buffer.
4.7   rsp  12/06/19 For aarch64 include xil_mmu.h. Fixes gcc warning.
4.8      sk   09/28/20 Fix the compilation error for xreg_cortexa9.h
                       preprocessor on R5 processor.
4.10  sa   08/12/22 Updated the example to use latest MIG cannoical define
                       i.e XPAR_MIG_0_C0_DDR4_MEMORY_MAP_BASEADDR.
4.11  sa   09/29/22 Fix infinite loops in the example.

Functions
int	XAxiCdma_SgIntrExample (XScuGic IntcInstancePtr, XAxiCdma InstancePtr, u16 DeviceId, u32 IntrId)
	The example to do the scatter gather transfer through interrupt. More...

int	main ()
	The entry point for this example. More...

Function Documentation

int main ( void )

The entry point for this example.

It sets up uart16550 if one is available, invokes the example function, and reports the execution status.

Parameters

None.

Returns

XST_SUCCESS if example finishes successfully
XST_FAILURE if example fails.

Note: None.

References XAxiCdma_SgIntrExample().

int XAxiCdma_SgIntrExample	(	XScuGic *	IntcInstancePtr,
		XAxiCdma *	InstancePtr,
		u16	DeviceId,
		u32	IntrId
	)

The example to do the scatter gather transfer through interrupt.

Parameters

IntcInstancePtr	is a pointer to the INTC instance
InstancePtr	is a pointer to the XAxiCdma instance
DeviceId	is the Device Id of the XAxiCdma instance
IntrId	is the interrupt Id for the XAxiCdma instance in build

Returns

XST_SUCCESS if example finishes successfully
XST_FAILURE if error occurs during transfer setup or transfer has errors

Note: If the hardware build has problems with interrupt, then this function hangs

References XAxiCdma_CfgInitialize(), XAxiCdma_GetError(), XAxiCdma_IntrEnable(), XAxiCdma_LookupConfig(), and XAXICDMA_XR_IRQ_ALL_MASK.

Referenced by main().

Overview

Functions

Function Documentation