|
| s32 | XIOModule_Initialize (XIOModule *InstancePtr, u32 BaseAddress) |
| | Initialize a specific interrupt controller instance/driver. More...
|
| |
| void | XIOModule_HandlerTable_Initialize (XIOModule *InstancePtr) |
| | Initializes all interrupt handlers to default handler for each interrupt ID. More...
|
| |
| s32 | XIOModule_Start (XIOModule *InstancePtr) |
| | Starts the IO Module. More...
|
| |
| void | XIOModule_Stop (XIOModule *InstancePtr) |
| | Stops the interrupt controller by disabling the output from the controller so that no interrupts will be caused by the interrupt controller. More...
|
| |
| s32 | XIOModule_Connect (XIOModule *InstancePtr, u8 Id, XInterruptHandler Handler, void *CallBackRef) |
| | Makes the connection between the Id of the interrupt source and the associated handler that is to run when the interrupt is recognized. More...
|
| |
| void | XIOModule_Disconnect (XIOModule *InstancePtr, u8 Id) |
| | Updates the interrupt table with the Null Handler and NULL arguments at the location pointed at by the Id. More...
|
| |
| void | XIOModule_Enable (XIOModule *InstancePtr, u8 Id) |
| | Enables the interrupt source provided as the argument Id. More...
|
| |
| void | XIOModule_Disable (XIOModule *InstancePtr, u8 Id) |
| | Disables the interrupt source provided as the argument Id such that the interrupt controller will not cause interrupts for the specified Id. More...
|
| |
| void | XIOModule_Acknowledge (XIOModule *InstancePtr, u8 Id) |
| | Acknowledges the interrupt source provided as the argument Id. More...
|
| |
| XIOModule_Config * | XIOModule_LookupConfig (u32 BaseAddress) |
| | Looks up the device configuration based on the unique device ID/BaseAddress. More...
|
| |
| s32 | XIOModule_ConnectFastHandler (XIOModule *InstancePtr, u8 Id, XFastInterruptHandler Handler) |
| | Makes the connection between the Id of the interrupt source and the associated handler that is to run when the interrupt is recognized. More...
|
| |
| void | XIOModule_SetNormalIntrMode (XIOModule *InstancePtr, u8 Id) |
| | Sets the normal interrupt mode for the specified interrupt in the Interrupt Mode Register, by resetting the vector to (BaseVector & 0xFFFFFF80) | 0x10 and selecting normal mode. More...
|
| |
| u32 | XIOModule_DiscreteRead (XIOModule *InstancePtr, u32 Channel) |
| | Read state of discretes for the specified GPI channel. More...
|
| |
| void | XIOModule_DiscreteWrite (XIOModule *InstancePtr, u32 Channel, u32 Data) |
| | Write to discretes register for the specified GPO channel. More...
|
| |
| s32 | XIOModule_Timer_Initialize (XIOModule *InstancePtr, u32 BaseAddress) |
| | Initializes a specific timer instance/driver. More...
|
| |
| void | XIOModule_Timer_Start (XIOModule *InstancePtr, u8 TimerNumber) |
| | Starts the specified timer counter of the device such that it starts running. More...
|
| |
| void | XIOModule_Timer_Stop (XIOModule *InstancePtr, u8 TimerNumber) |
| | Stops the timer by disabling it. More...
|
| |
| u32 | XIOModule_GetValue (XIOModule *InstancePtr, u8 TimerNumber) |
| | Get the current value of the specified timer counter. More...
|
| |
| void | XIOModule_SetResetValue (XIOModule *InstancePtr, u8 TimerNumber, u32 ResetValue) |
| | Set the reset value for the specified timer counter. More...
|
| |
| u32 | XIOModule_GetCaptureValue (XIOModule *InstancePtr, u8 TimerNumber) |
| | Returns the timer counter value that was captured the last time the external capture input was asserted. More...
|
| |
| void | XIOModule_Reset (XIOModule *InstancePtr, u8 TimerNumber) |
| | Resets the specified timer counter of the device. More...
|
| |
| s32 | XIOModule_IsExpired (XIOModule *InstancePtr, u8 TimerNumber) |
| | Checks if the specified timer counter of the device has expired. More...
|
| |
| u32 | XIOModule_IoReadWord (XIOModule *InstancePtr, u32 ByteOffset) |
| | Read 32-bit word from the IO Bus memory mapped IO. More...
|
| |
| u16 | XIOModule_IoReadHalfword (XIOModule *InstancePtr, u32 ByteOffset) |
| | Read 16-bit halfword from the IO Bus memory mapped IO. More...
|
| |
| u8 | XIOModule_IoReadByte (XIOModule *InstancePtr, u32 ByteOffset) |
| | Read byte from the IO Bus memory mapped IO. More...
|
| |
| void | XIOModule_IoWriteWord (XIOModule *InstancePtr, u32 ByteOffset, u32 Data) |
| | Write 32-bit word to the IO Bus memory mapped IO. More...
|
| |
| void | XIOModule_IoWriteHalfword (XIOModule *InstancePtr, u32 ByteOffset, u16 Data) |
| | Write 16-bit word to the IO Bus memory mapped IO. More...
|
| |
| void | XIOModule_IoWriteByte (XIOModule *InstancePtr, u32 ByteOffset, u8 Data) |
| | Write 8-bit word to the IO Bus memory mapped IO. More...
|
| |