Known Issues¶

On Ubuntu 24.04 and Yocto 2024.2, the Linux image (Ubuntu or Yocto generated wic image) is shared between different starter kits (e.g. the same image works across KD240, KR260, KV260). However, the SD card would be “locked in” to the started kit on which it first booted. E.g. once you have booted the common image on a KV260, you will not be able to re-use the same SD card with the shared common Linux image on a KR260 or a KD240. This is because on initial boot, the default bitstream will be locked in based on EEPROM reading on first boot, and this is not updated on subsequent boots.

Miscellaneous Information¶

If needed, the following commands are used to set the System Timezone and locale:

Set timezone:

sudo timedatectl set-ntp true
sudo timedatectl set-timezone America/Los_Angeles
timedatectl

Set locale:

sudo locale-gen en_US en_US.UTF-8
sudo update-locale LC_ALL=en_US.UTF-8 LANG=en_US.UTF-8
export LANG=en_US.UTF-8
locale

The following example command sets the date and time:

sudo date --set "11 January 2023 16:47:00"