P2P Simple Example

This is simple example of vector increment to describe P2P between FPGA and NVMe SSD.

KEY CONCEPTS: P2P, NVMe SSD, SmartSSD

KEYWORDS: XCL_MEM_EXT_P2P_BUFFER, pread, pwrite, O_DIRECT, O_RDWR

PCIe peer-to-peer communication (P2P) is a PCIe feature which enables two PCIe devices to directly transfer data between each other without using host RAM as a temporary storage. The latest version of SDx PCIe platforms support P2P feature via PCIe Resizeable BAR Capability

Using the P2P enabled device the data can be transferred between the FPGA device and another NVMe Device, such as SMART SSD, without migrating the data via host memory space

// Creating P2P Buffer
  cl_mem_ext_ptr_t outExt;
  outExt = {XCL_MEM_EXT_P2P_BUFFER, NULL, 0};

  cl_mem p2pBo =
      clCreateBuffer(context, CL_MEM_WRITE_ONLY | CL_MEM_EXT_PTR_XILINX,
                     vector_size_bytes, &outExt, &err);
  clSetKernelArg(krnl_adder, narg++, sizeof(cl_mem), &p2pBo);

// Map P2P buffer to host access pointers
  p2pPtr = (uint32_t *)clEnqueueMapBuffer(
        q, p2pBo, CL_TRUE, CL_MAP_WRITE | CL_MAP_READ, 0, vector_size_bytes, 0, NULL, NULL, NULL);

  filename = <full path to SSD>
  fd = open(filename, O_RDWR | O_DIRECT);

// Read chunk_size bytes starting at offset 0 from fd into p2pPtr
  pread(fd, p2pPtr, chunk_size, 0);

// Wrtie chunk_size bytes starting at offset 0 from p2pPtr into fd
  pwrite(fd, p2pPtr, chunk_size, 0);

EXCLUDED PLATFORMS

Platforms containing following strings in their names are not supported for this example :

zc
u200
u250
u280
u50
aws

DESIGN FILES

Application code is located in the src directory. Accelerator binary files will be compiled to the xclbin directory. The xclbin directory is required by the Makefile and its contents will be filled during compilation. A listing of all the files in this example is shown below

src/adder.cpp
src/host.cpp

COMMAND LINE ARGUMENTS

Once the environment has been configured, the application can be executed by

./host <adder XCLBIN> /dev/nvme0n1