Vadd 2 Kernel Clocks (RTL Kernel)

This example shows vector addition with 2 kernel clocks using RTL Kernel.

KEY CONCEPTS: RTL Kernel, Multiple Kernel Clocks

KEYWORDS: kernel_frequency

This example demonstrates the use of two kernel clocks for a simple case of vector addition.

An RTL kernel can have up to two external clock interfaces; a primary clock, ap_clk, and an optional secondary clock, ap_clk_2. Both clocks can be used for clocking internal logic. However, all external RTL kernel interfaces must be clocked on the primary clock. Both primary and secondary clocks support independent automatic frequency scaling.

These clock frequencies are specified at V++ linking stage in the following manner.

kernel_frequency=0:150|1:250

DESIGN FILES

Application code is located in the src directory. Accelerator binary files will be compiled to the xclbin directory. The xclbin directory is required by the Makefile and its contents will be filled during compilation. A listing of all the files in this example is shown below

src/hdl/krnl_vadd_2clk_rtl.v
src/hdl/krnl_vadd_2clk_rtl_adder.sv
src/hdl/krnl_vadd_2clk_rtl_axi_read_master.sv
src/hdl/krnl_vadd_2clk_rtl_axi_write_master.sv
src/hdl/krnl_vadd_2clk_rtl_control_s_axi.v
src/hdl/krnl_vadd_2clk_rtl_counter.sv
src/hdl/krnl_vadd_2clk_rtl_int.sv
src/host.cpp
src/kernel.xml

COMMAND LINE ARGUMENTS

Once the environment has been configured, the application can be executed by

./host <vadd XCLBIN>