Shift Register (OpenCL Kernel)

This example demonstrates how to shift values in registers in each clock cycle

KEY CONCEPTS: Kernel Optimization, Shift Register, FIR

KEYWORDS: xcl_array_partition, getProfilingInfo

This example demonstrates two ways to implement an FIR filter discrete convolution operation. It requires the values of all elements of FIR filter array for each element of the output array.

In the naive implementation, limited memory ports are available from the shift_reg array to the kernel interface thus efficient pipelining of the operation is not possible.

int coeff_reg[N_COEFF];
    __attribute__((xcl_loop_tripcount(c_n, c_n)))
    read_coef: for (int i = 0 ; i < N_COEFF ; i++) coeff_reg[i] = coeff[i];

    __attribute__((xcl_loop_tripcount(c_size, c_size)))
    outer_loop:
    for (int j = 0; j < signal_length; j++) {
        int acc = 0;
        shift_loop:
        __attribute__((xcl_pipeline_loop(1)))
        for (int i = min(j,N_COEFF-1); i >= 0; i--) {
            acc += signal_r[j-i] * coeff_reg[i];
        }
        output_r[j] = acc;
    }

In the fir_shift_register attribute xcl_array_partition is used to provide all array values simultaneously by partitioning the array such that each element has its own ports for read/write. Also, since outer loop uses attribute xcl_pipeline_loop, Vivado HLS compiler automatically applies loop unrolling to the shift_loop.

int shift_reg[N_COEFF] __attribute__((xcl_array_partition(complete, 0)));

   __attribute__((xcl_loop_tripcount(c_n, c_n)))
   init_loop:
   for (int i = 0; i < N_COEFF; i++) {
       shift_reg[i] = 0;
       coeff_reg[i] = coeff[i];
   }

   outer_loop:
   __attribute__((xcl_pipeline_loop(1)))
   __attribute__((xcl_loop_tripcount(c_size, c_size)))
   for(int j = 0; j < signal_length; j++) {
       int acc = 0;
       int x = signal_r[j];

       __attribute__((xcl_loop_tripcount(c_n, c_n)))
       shift_loop:
       for (int i = N_COEFF-1; i >= 0; i--) {
           if (i == 0) {
               acc += x * coeff_reg[0];
               shift_reg[0] = x;
           } else {
               shift_reg[i] = shift_reg[i-1];
               acc += shift_reg[i] * coeff_reg[i];
           }
       }
       output_r[j] = acc;
   }

EXCLUDED PLATFORMS

Platforms containing following strings in their names are not supported for this example :

nodma

DESIGN FILES

Application code is located in the src directory. Accelerator binary files will be compiled to the xclbin directory. The xclbin directory is required by the Makefile and its contents will be filled during compilation. A listing of all the files in this example is shown below

src/fir.cl
src/host.cpp

Access these files in the github repo by clicking here.

COMMAND LINE ARGUMENTS

Once the environment has been configured, the application can be executed by

./cl_shift_register <fir XCLBIN>