PLRAM Config

This example showcases how to configure various PLRAM parameters like Memory Size, Memory Type(BRAM/URAM) etc.

KEY CONCEPTS: Vitis Memory Hierarchy, PLRAMs

KEYWORDS: PLRAM, BRAM, URAM

This example demonstrates how size and type of each PLRAM can be configured on the target platform before kernels or Compute Units are linked into the system.

We can use a Tcl script to configure the PLRAM before system linking occurs. The use of the Tcl script can be enabled on the v++ command line as follows:

# Setup PLRAM
sdx_memory_subsystem::update_plram_specification [get_bd_cells /memory_subsystem] PLRAM_MEM00 { SIZE 2M AXI_DATA_WIDTH 512
SLR_ASSIGNMENT SLR0 READ_LATENCY 10 MEMORY_PRIMITIVE URAM}

sdx_memory_subsystem::update_plram_specification [get_bd_cells /memory_subsystem] PLRAM_MEM01 { SIZE 2M AXI_DATA_WIDTH 512
SLR_ASSIGNMENT SLR1 READ_LATENCY 10 MEMORY_PRIMITIVE URAM}

validate_bd_design -force
save_bd_design

In the example above, PLRAM_MEM00 is changed to be 2 MB in size and composed of UltraRAM; PLRAM_MEM01 is changed to be 2 MB in size and composed of UltraRAM.

PLRAM can be assigned to a buffer by using sp tags in the vadd.cfg file along with the port name and kernel name.

[connectivity]
sp=vadd_1.in1:PLRAM[0]
sp=vadd_1.in2:PLRAM[1]
sp=vadd_1.out:PLRAM[1]

EXCLUDED PLATFORMS

Platforms containing following strings in their names are not supported for this example :

_u25_
u30
zc
vck
samsung
_u2_
nodma

DESIGN FILES

Application code is located in the src directory. Accelerator binary files will be compiled to the xclbin directory. The xclbin directory is required by the Makefile and its contents will be filled during compilation. A listing of all the files in this example is shown below

src/host.cpp
src/vadd.cpp

Access these files in the github repo by clicking here.

COMMAND LINE ARGUMENTS

Once the environment has been configured, the application can be executed by

./plram_config <vadd XCLBIN>