DMA Control Application (dma-ctl)¶
QDMA driver comes with a command-line configuration utility called dma-ctl to manage the driver.
The Xilinx QDMA control tool, dma-ctl is a command Line utility which is installed in /usr/local/sbin/ and allows administration of the Xilinx QDMA queues. Make sure that the installation path /usr/local/sbin/ is added to the PATH variable.
Note:¶
The name of the application in previous releases before 2020.1 was dmactl. If user installed dmactl application aleady in /usr/local/sbin area, make sure to uninstall the old application(s). Using dmactl aginst latest driver would lead to undefined behaviour and errors may be observed.
dma-ctl application can perform the following functions:
Query the list of functions binded QDMA driver
Query control and configuration
- List all the queues on a device
- Add/configure a new queue on a device
- Start an already added/configured queue, i.e., bring the queue to on line mode
- Stop a started queue, i.e., bring the queue to off line mode
- Delete an already configured queue
Register access
- Read a register
- Write a register
- Dump the qdma configuration bar and user bar registers
Debug helper
- Display a queue’s configuration parameters
- Display a queue’s descriptor ring entries
- Display a c2h queue’s completion ring entries
- Display the interrupt ring entries
For dma-ctl help run dma-ctl –h
For more details on the dma-ctl tool commands and options for each command, refer to dma-ctl man page.
For dma-ctl man page, run man dma-ctl
Device Management Commands¶
List devices¶
command: dma-ctl dev list
This command lists all the physical and virtual functions available in the system along with the number of queues assigned to each function, queue base and queue max.
Each qdma device name is listed as qdma<bbddf> where <bbddf> is bus number, device number and function number.
Initially when the system is started, the queues are not assigned to any of the available functions.
[xilinx@]# dma-ctl dev list
qdma01000 0000:01:00.0 max QP: 0, -~-
qdma01001 0000:01:00.1 max QP: 0, -~-
qdma01002 0000:01:00.2 max QP: 0, -~-
qdma01003 0000:01:00.3 max QP: 0, -~-
qdmavf01004 0000:01:00.4 max QP: 0, -~-
[xilinx@]# echo 100 > /sys/bus/pci/devices/0000\:01\:00.0/qdma/qmax
[xilinx@]# echo 100 > /sys/bus/pci/devices/0000\:01\:00.1/qdma/qmax
[xilinx@]# echo 100 > /sys/bus/pci/devices/0000\:01\:00.2/qdma/qmax
[xilinx@]# echo 100 > /sys/bus/pci/devices/0000\:01\:00.3/qdma/qmax
[xilinx@]# echo 100 > /sys/bus/pci/devices/0000\:01\:00.4/qdma/qmax
[xilinx@]# dma-ctl dev list
qdma01000 0000:01:00.0 max QP: 100, 0~99
qdma01001 0000:01:00.1 max QP: 100, 100~199
qdma01002 0000:01:00.2 max QP: 100, 200~299
qdma01003 0000:01:00.3 max QP: 100, 300~399
qdmavf01004 0000:01:00.4 max QP: 100, 400~499
Queue Management Commands¶
List Version¶
command: dma-ctl qdma<bbddf> cap
This command lists hardware and software version details and device capabilities.
[xilinx@]# dma-ctl qdma01000 cap
=============Hardware Version============
RTL Version : RTL Patch
Vivado ReleaseID : vivado 2020.2
QDMA Device Type : Soft IP
QDMA IP Type : QDMA Soft IP
============Software Version============
qdma driver version : 2020.2.0.0
=============Hardware Capabilities============
Number of PFs supported : 4
Total number of queues supported : 2048
MM channels : 1
FLR Present : yes
ST enabled : yes
MM enabled : yes
Mailbox enabled : yes
MM completion enabled : no
Debug Mode enabled : no
Desc Engine Mode : Internal and Bypass mode
List Device Statistics¶
command: dma-ctl qdma<bbddf> stat
This command lists the statistics accumulated for this device
[xilinx@]# dma-ctl qdma01000 stat
qdma01000:statistics
Total MM H2C packets processed = 0
Total MM C2H packets processed = 0
Total ST H2C packets processed = 0
Total ST C2H packets processed = 0
Min Ping Pong Latency = 0
Max Ping Pong Latency = 0
Avg Ping Pong Latency = 0
Use dma-ctl qdma01000 stat clear to clear the statistics collected
Add a Queue¶
command: dma-ctl qdma<bbddf> q add idx <N> [mode <st|mm>] [dir <h2c|c2h|bi>]
This command allows the user to add a queue.
Parameters
- <N> : Queue number
- mode : mode of the queue, streaming(st) or memory mapped(mm). Mode defaults to mm.
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi). Direction defaults to h2c.
[xilinx@]# dma-ctl qdma01000 q add idx 4 mode mm dir h2c
qdma01000-MM-4 H2C added.
Added 1 Queues.
Add a List of Queues¶
command: dma-ctl qdma<bbddf> q add list <start_idx> <N> [ mode <st|mm> ] [ dir <h2c|c2h|bi> ]
This command allows the user to add a list of queues.
Parameters
- <start_idx> : Starting queue number
- <N> :Number of queues to add
- mode : mode of the queue, streaming(st) or memory mapped(mm)
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi)
[xilinx@]# dma-ctl qdma01000 q add list 1 4 mode mm dir h2c
qdma01000-MM-1 H2C added.
qdma01000-MM-2 H2C added.
qdma01000-MM-3 H2C added.
qdma01000-MM-4 H2C added.
Added 4 Queues.
Start a Queue¶
This command allows the user to start a queue.
command:
dma-ctl qdma<bbddf> q start idx <N> [dir <h2c|c2h|bi>] [idx_ringsz <0:15>] [idx_bufsz <0:15>] [idx_tmr <0:15>] [idx_cntr <0:15>] [trigmode <every|usr_cnt|usr|usr_tmr|dis>] [cmptsz <0|1|2|3>] [desc_bypass_en] [pfetch_en] [pfetch_bypass_en] [dis_cmpl_status] [dis_cmpl_status_acc] [dis_cmpl_status_pend_chk] [c2h_udd_en] [fetch_credit <h2c|c2h|bi|none>] [c2h_cmpl_intr_en] [cmpl_ovf_dis] [mm_chn <0:1>] [aperture_sz <Power of 2 aperture size>]
Parameters
- <N> : Queue number
- dir : Direction of the queue, host-to-card (h2c), card-to-host (c2h) or both (bi). Directions defaults to h2c.
- idx_ringsz: CSR register ring size index ( 0 - 15 )
- idx_bufsz : CSR register buffer size index ( 0 - 15 )
- idx_tmr : CSR register timer index ( 0 - 15 )
- idx_cntr: CSR register counter index ( 0 - 15 )
- trigmode: Timer trigger mode (every, usr_cnt, usr, usr_tmr, dis)
- cmptsz : Completion size ( 0: 8 bytes, 1: 16 bytes, 2:32 bytes, 3:64 bytes)
- sw_desc_sz : Descriptor size ( 3: 64 bytes)
- desc_bypass_en : Enable descriptor bypass
- pfetch_en : Enable prefetch ( 0: Disable, 1: Enable )
- pfetch_bypass_en : Enable prefetch bypass ( 0: Disable, 1: Enable )
- dis_cmpl_status : Disable completion status update ( 1: Disable, 0: Enable )
- dis_cmpl_status_acc : Disable completion status accumulation ( 1: Disable, 0: Enable )
- dis_cmpl_status_pend_chk : Disable completion status pending check ( 1: Disable, 0: Enable )
- c2h_udd_en : Enable immediate data(User Defined Data) ( 0: Disable, 1: Enable )
- fetch_credit : Enable fetch credit (host-to-card (h2c), card-to-host (c2h), both (bi), disable (none))
- c2h_cmpl_intr_en : Enable c2h completion interval ( 0: Disable, 1: Enable )
- cmpl_ovf_dis : Disable completion over flow check ( 1: Disable, 0: Enable )
- mm_chn : MM Channel to be used(0/1)
- aperture_sz : aperture size power of 2 for keyhole feature
- Note on keyhole feature
- Provides support of programming over PCIe. QDMA SW provides a capability to program a .pdi file to a specific aperture within a Versal device.
This enables the DMA to write data to a fixed size FPGA aperture. When the end of the user specified aperture size is reached, transactions continue to transfer data by looping back to the start of the aperture window. This is repeated until all data has been programmed into the user specified aperture window.
dma-to-devicecan be used to write to a specific offset in the RAM with the aperture specified at the time when the Q is started.
[xilinx@]# dma-ctl qdma01000 q start idx 4 dir h2c
dma-ctl: Info: Default ring size set to 2048
1 Queues started, idx 4 ~ 4.
Start a List of Queues¶
command:
dma-ctl qdma<bbddf> q start list <start_idx> <N> [dir <h2c|c2h|bi>] [idx_ringsz <0:15>] [idx_bufsz <0:15>] [idx_tmr <0:15>] [idx_cntr <0:15>] [trigmode <every|usr_cnt|usr|usr_tmr|dis>] [cmptsz <0|1|2|3>] [desc_bypass_en] [pfetch_en] [pfetch_bypass_en] [dis_cmpl_status] [dis_cmpl_status_acc] [dis_cmpl_status_pend_chk] [c2h_udd_en] [fetch_credit <h2c|c2h|bi|none>] [c2h_cmpl_intr_en] [cmpl_ovf_dis] [mm_chn <0:1>] [aperture_sz <Power of 2 aperture size>]
This command allows the user to start a list of queues.
Parameters
- <start_idx> : Starting queue number
- <N> : Number of queues to start
- dir : direction of the queue, host-to-card (h2c), card-to-host (c2h) or both (bi). Directions defaults to h2c.
- idx_ringsz: CSR register ring size index ( 0 - 15 )
- idx_bufsz : CSR register buffer size index ( 0 - 15 )
- idx_tmr : CSR register timer index ( 0 - 15 )
- idx_cntr: CSR register counter index ( 0 - 15 )
- trigmode: Timer trigger mode (every, usr_cnt, usr, usr_tmr, dis)
- cmptsz : Completion size ( 0: 8 bytes, 1: 16 bytes, 2:32 bytes, 3:64 bytes)
- desc_bypass_en : Enable descriptor bypass ( 0: Disable, 1: Enable )
- pfetch_en : Enable prefetch ( 0: Disable, 1: Enable )
- pfetch_bypass_en : Enable prefetch bypass ( 0: Disable, 1: Enable )
- dis_cmpl_status : Disable completion status update
- dis_cmpl_status_pend_chk : Disable completion status pending check
- c2h_udd_en : Enable immdeiate data(User Defined Data)
- fetch_credit : Enable fetch credit (host-to-card (h2c), card-to-host (c2h), both (bi), disable (none))
- c2h_cmpl_intr_en : Enable c2h completion interval ( 0: Disable, 1: Enable )
- cmpl_ovf_dis : Disable completion over flow check ( 1: Disable, 0: Enable )
- mm_chn : MM Channel to be used(0/1))
- aperture_sz : aperture size power of 2
[xilinx@]# dma-ctl qdma01000 q start list 1 4 dir h2c
Started Queues 1 -> 4.
List of Queues added¶
command: dma-ctl qdma<bbddf> q list <start_idx> <num_Qs>
This command allows user to list queues added/configured.
Parameter
- <start_idx> : Starting queue number
- <num_Qs> : Number of queues to list
[xilinx@]# dma-ctl qdma01000 q list 1 4
H2C Q: 4, C2H Q: 0, CMPT Q 0.
qdma06000-MM-1 H2C online
hw_ID 1, thp ?, desc 0x0000000050bf1609/0xfffc0000, 2048
qdma06000-MM-2 H2C online
hw_ID 2, thp ?, desc 0x00000000e4e32bca/0xfffa0000, 2048
qdma06000-MM-3 H2C online
hw_ID 3, thp ?, desc 0x00000000a84d8d83/0xfff80000, 2048
qdma06000-MM-4 H2C online
hw_ID 4, thp ?, desc 0x00000000ddf89665/0xfff60000, 2048
Stop a Queue¶
command: dma-ctl qdma<bbddf> q stop idx <N> [dir <h2c|c2h|bi>]
This command allows the user to stop a queue.
Parameters
- <N> : Queue number
- dir : direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi). Directions defaults to h2c.
[xilinx@]# dma-ctl qdma01000 q stop idx 4 dir h2c
dma-ctl: Info: Default ring size set to 2048
Stopped Queues 4 -> 4.
Stop a List of Queues¶
command: dma-ctl qdma<bbddf> q stop list <start_idx> <N> [dir <h2c|c2h|bi>]
This command allows the user to stop a list of queues.
Parameters
- <start_idx> : Starting queue number
- <N> : Number of queues to delete
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi). Directions defaults to h2c.
[xilinx@]# dma-ctl qdma01000 q stop list 1 4 dir h2c
Stopped Queues 1 -> 4.
Delete a Queue¶
command: dma-ctl qdma<bbddf> q del idx <N> [dir <h2c|c2h|bi>]
This command allows the user to delete a queue.
Parameters
- <N> : Queue number
- dir : direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi). Directions defaults to h2c.
[xilinx@]# dma-ctl qdma01000 q del idx 4 dir h2c
Deleted Queues 4 -> 4.
Delete a List of Queues¶
command: dma-ctl <bbddf> q del list <start_idx> <N> [ dir <h2c|c2h|bi> ]
This command allows the user to delete a list of queues.
Parameters
- <start_idx> : Starting queue number
- <N> : Number of queues to delete
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi)
[xilinx@]# dma-ctl qdma01000 q del list 1 4 dir h2c
Deleted Queues 1 -> 4.
Dump Queue Information¶
command: dma-ctl qdma<bbddf> q dump idx <N> [dir <h2c|c2h|bi>]
Dump the queue information
Parameters
- <N> : Queue number
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi)
Sample output is given below:
[xilinx@]# dma-ctl qdma01000 q dump idx 1 dir bi
qdma01000-ST-0 H2C online
hw_ID 0, thp ?, desc 0x000000002faff247/0x2a878000, 1536
cmpl status: 0x00000000377ea451, 00000000 00000000
SOFTWARE CTXT:
Interrupt Aggregation 0x1 1
Ring Index 0x0 0
Descriptor Ring Base Addr (High) 0x0 0
Descriptor Ring Base Addr (Low) 0x2a878000 713523200
Is Memory Mapped 0x0 0
Marker Disable 0x1 1
IRQ Request 0x0 0
Writeback Error Sent 0x0 0
Error 0x0 0
Interrupt No Last 0x0 0
Port Id 0x0 0
Interrupt Enable 0x1 1
Writeback Enable 0x1 1
MM Channel 0x0 0
Bypass Enable 0x0 0
Descriptor Size 0x1 1
Ring Size 0x9 9
Fetch Max 0x0 0
Address Translation 0x0 0
Write back/Intr Interval 0x1 1
Write back/Intr Check 0x1 1
Fetch Credit Enable 0x0 0
Queue Enable 0x1 1
Function Id 0x0 0
IRQ Arm 0x1 1
PIDX 0x0 0
HARDWARE CTXT:
Fetch Pending 0x0 0
Eviction Pending 0x0 0
Queue Invalid No Desc Pending 0x1 1
Descriptors Pending 0x0 0
Credits Consumed 0x0 0
CIDX 0x0 0
CREDIT CTXT:
Credit 0x0 0
INTR CTXT:
at 0x0 0
pidx 0x0 0
page_size 0x0 0
baddr_4k (High) 0x0 0
baddr_4k (Low) 0x2a801000 713035776
color 0x1 1
int_st 0x0 0
vec 0x3 3
valid 0x1 1
total descriptor processed: 0
qdma01000-ST-0 C2H online
hw_ID 0, thp ?, desc 0x00000000219f976e/0x2a85c000, 1536
cmpt desc 0x0000000086ae1f7a/0x2a870000, 2048
cmpl status: 0x00000000a17113db, 00000000 00000000
CMPT CMPL STATUS: 0x00000000973734af, 00000000 00000000
SOFTWARE CTXT:
Interrupt Aggregation 0x1 1
Ring Index 0x0 0
Descriptor Ring Base Addr (High) 0x0 0
Descriptor Ring Base Addr (Low) 0x2a85c000 713408512
Is Memory Mapped 0x0 0
Marker Disable 0x0 0
IRQ Request 0x0 0
Writeback Error Sent 0x0 0
Error 0x0 0
Interrupt No Last 0x0 0
Port Id 0x0 0
Interrupt Enable 0x0 0
Writeback Enable 0x0 0
MM Channel 0x0 0
Bypass Enable 0x0 0
Descriptor Size 0x0 0
Ring Size 0x9 9
Fetch Max 0x0 0
Address Translation 0x0 0
Write back/Intr Interval 0x1 1
Write back/Intr Check 0x0 0
Fetch Credit Enable 0x1 1
Queue Enable 0x1 1
Function Id 0x0 0
IRQ Arm 0x0 0
PIDX 0x5ff 1535
HARDWARE CTXT:
Fetch Pending 0x0 0
Eviction Pending 0x0 0
Queue Invalid No Desc Pending 0x1 1
Descriptors Pending 0x0 0
Credits Consumed 0x0 0
CIDX 0x0 0
CREDIT CTXT:
Credit 0x0 0
CMPT CTXT:
Interrupt Aggregation 0x1 1
Ring Index 0x0 0
Address Translation 0x0 0
Over Flow Check Disable 0x0 0
Full Update 0x0 0
Timer Running 0x0 0
Trigger Pending 0x0 0
Error 0x0 0
Valid 0x1 1
CIDX 0x0 0
PIDX 0x0 0
Descriptor Size 0x0 0
Base Address (High) 0x0 0
Base Address (Low) 0x2a870000 713490432
Ring Size 0x0 0
Color 0x1 1
Interrupt State 0x1 1
Timer Index 0x0 0
Counter Index 0x0 0
Function Id 0x0 0
Trigger Mode 0x1 1
Enable Interrupt 0x1 1
Enable Status Desc Update 0x1 1
PREFETCH CTXT:
Valid 0x1 1
Software Credit 0x5ff 1535
In Prefetch 0x0 0
Prefetch Enable 0x0 0
Error 0x0 0
Port Id 0x0 0
Buffer Size Index 0x0 0
Bypass 0x0 0
INTR CTXT:
at 0x0 0
pidx 0x0 0
page_size 0x0 0
baddr_4k (High) 0x0 0
baddr_4k (Low) 0x2a801000 713035776
color 0x1 1
int_st 0x0 0
vec 0x3 3
valid 0x1 1
total descriptor processed: 0
Dumped Queues 0 -> 0.
Dump Multiple Queue Information¶
command: dma-ctl qdma<bbddf> q dump idx <N> [dir <h2c|c2h|bi>]
Dumps the information for multiple queues
Parameters
- <start_idx> : Starting queue number
- <N> : Number of queues to dump
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi)
[xilinx@]# dma-ctl qdma01000 q dump list 1 2 dir bi
qdma01000-ST-1 H2C online
hw_ID 1, thp ?, desc 0x000000006c71b76a/0x2a890000, 1536
cmpl status: 0x00000000ad836574, 00000000 00000000
SOFTWARE CTXT:
Interrupt Aggregation 0x1 1
Ring Index 0x0 0
Descriptor Ring Base Addr (High) 0x0 0
Descriptor Ring Base Addr (Low) 0x2a890000 713621504
Is Memory Mapped 0x0 0
Marker Disable 0x1 1
IRQ Request 0x0 0
Writeback Error Sent 0x0 0
Error 0x0 0
Interrupt No Last 0x0 0
Port Id 0x0 0
Interrupt Enable 0x1 1
Writeback Enable 0x1 1
MM Channel 0x0 0
Bypass Enable 0x0 0
Descriptor Size 0x1 1
Ring Size 0x9 9
Fetch Max 0x0 0
Address Translation 0x0 0
Write back/Intr Interval 0x1 1
Write back/Intr Check 0x1 1
Fetch Credit Enable 0x0 0
Queue Enable 0x1 1
Function Id 0x0 0
IRQ Arm 0x1 1
PIDX 0x0 0
HARDWARE CTXT:
Fetch Pending 0x0 0
Eviction Pending 0x0 0
Queue Invalid No Desc Pending 0x1 1
Descriptors Pending 0x0 0
Credits Consumed 0x0 0
CIDX 0x0 0
CREDIT CTXT:
Credit 0x0 0
INTR CTXT:
at 0x0 0
pidx 0x0 0
page_size 0x0 0
baddr_4k (High) 0x0 0
baddr_4k (Low) 0x2a801000 713035776
color 0x1 1
int_st 0x0 0
vec 0x3 3
valid 0x1 1
total descriptor processed: 0
qdma01000-ST-1 C2H online
hw_ID 1, thp ?, desc 0x000000007d2ed7f0/0x2a880000, 1536
cmpt desc 0x000000005e745eb2/0x2a888000, 2048
cmpl status: 0x000000008a822731, 00000000 00000000
CMPT CMPL STATUS: 0x00000000b4ec91f7, 00000000 00000000
SOFTWARE CTXT:
Interrupt Aggregation 0x1 1
Ring Index 0x0 0
Descriptor Ring Base Addr (High) 0x0 0
Descriptor Ring Base Addr (Low) 0x2a880000 713555968
Is Memory Mapped 0x0 0
Marker Disable 0x0 0
IRQ Request 0x0 0
Writeback Error Sent 0x0 0
Error 0x0 0
Interrupt No Last 0x0 0
Port Id 0x0 0
Interrupt Enable 0x0 0
Writeback Enable 0x0 0
MM Channel 0x0 0
Bypass Enable 0x0 0
Descriptor Size 0x0 0
Ring Size 0x9 9
Fetch Max 0x0 0
Address Translation 0x0 0
Write back/Intr Interval 0x1 1
Write back/Intr Check 0x0 0
Fetch Credit Enable 0x1 1
Queue Enable 0x1 1
Function Id 0x0 0
IRQ Arm 0x0 0
PIDX 0x5ff 1535
HARDWARE CTXT:
Fetch Pending 0x0 0
Eviction Pending 0x0 0
Queue Invalid No Desc Pending 0x1 1
Descriptors Pending 0x0 0
Credits Consumed 0x0 0
CIDX 0x0 0
CREDIT CTXT:
Credit 0x0 0
CMPT CTXT:
Interrupt Aggregation 0x1 1
Ring Index 0x0 0
Address Translation 0x0 0
Over Flow Check Disable 0x0 0
Full Update 0x0 0
Timer Running 0x0 0
Trigger Pending 0x0 0
Error 0x0 0
Valid 0x1 1
CIDX 0x0 0
PIDX 0x0 0
Descriptor Size 0x0 0
Base Address (High) 0x0 0
Base Address (Low) 0x2a888000 713588736
Ring Size 0x0 0
Color 0x1 1
Interrupt State 0x1 1
Timer Index 0x0 0
Counter Index 0x0 0
Function Id 0x0 0
Trigger Mode 0x1 1
Enable Interrupt 0x1 1
Enable Status Desc Update 0x1 1
PREFETCH CTXT:
Valid 0x1 1
Software Credit 0x5ff 1535
In Prefetch 0x0 0
Prefetch Enable 0x0 0
Error 0x0 0
Port Id 0x0 0
Buffer Size Index 0x0 0
Bypass 0x0 0
INTR CTXT:
at 0x0 0
pidx 0x0 0
page_size 0x0 0
baddr_4k (High) 0x0 0
baddr_4k (Low) 0x2a801000 713035776
color 0x1 1
int_st 0x0 0
vec 0x3 3
valid 0x1 1
total descriptor processed: 0
qdma01000-ST-2 H2C online
hw_ID 2, thp ?, desc 0x000000007167a03d/0x2a8a0000, 1536
cmpl status: 0x000000000d8c788d, 00000000 00000000
SOFTWARE CTXT:
Interrupt Aggregation 0x1 1
Ring Index 0x0 0
Descriptor Ring Base Addr (High) 0x0 0
Descriptor Ring Base Addr (Low) 0x2a8a0000 713687040
Is Memory Mapped 0x0 0
Marker Disable 0x1 1
IRQ Request 0x0 0
Writeback Error Sent 0x0 0
Error 0x0 0
Interrupt No Last 0x0 0
Port Id 0x0 0
Interrupt Enable 0x1 1
Writeback Enable 0x1 1
MM Channel 0x0 0
Bypass Enable 0x0 0
Descriptor Size 0x1 1
Ring Size 0x9 9
Fetch Max 0x0 0
Address Translation 0x0 0
Write back/Intr Interval 0x1 1
Write back/Intr Check 0x1 1
Fetch Credit Enable 0x0 0
Queue Enable 0x1 1
Function Id 0x0 0
IRQ Arm 0x1 1
PIDX 0x0 0
HARDWARE CTXT:
Fetch Pending 0x0 0
Eviction Pending 0x0 0
Queue Invalid No Desc Pending 0x1 1
Descriptors Pending 0x0 0
Credits Consumed 0x0 0
CIDX 0x0 0
CREDIT CTXT:
Credit 0x0 0
INTR CTXT:
at 0x0 0
pidx 0x0 0
page_size 0x0 0
baddr_4k (High) 0x0 0
baddr_4k (Low) 0x2a801000 713035776
color 0x1 1
int_st 0x0 0
vec 0x3 3
valid 0x1 1
total descriptor processed: 0
qdma01000-ST-2 C2H online
hw_ID 2, thp ?, desc 0x000000009c562437/0x2a884000, 1536
cmpt desc 0x000000006c25b118/0x2a898000, 2048
cmpl status: 0x0000000099bd702f, 00000000 00000000
CMPT CMPL STATUS: 0x000000000e1bd43c, 00000000 00000000
SOFTWARE CTXT:
Interrupt Aggregation 0x1 1
Ring Index 0x0 0
Descriptor Ring Base Addr (High) 0x0 0
Descriptor Ring Base Addr (Low) 0x2a884000 713572352
Is Memory Mapped 0x0 0
Marker Disable 0x0 0
IRQ Request 0x0 0
Writeback Error Sent 0x0 0
Error 0x0 0
Interrupt No Last 0x0 0
Port Id 0x0 0
Interrupt Enable 0x0 0
Writeback Enable 0x0 0
MM Channel 0x0 0
Bypass Enable 0x0 0
Descriptor Size 0x0 0
Ring Size 0x9 9
Fetch Max 0x0 0
Address Translation 0x0 0
Write back/Intr Interval 0x1 1
Write back/Intr Check 0x0 0
Fetch Credit Enable 0x1 1
Queue Enable 0x1 1
Function Id 0x0 0
IRQ Arm 0x0 0
PIDX 0x5ff 1535
HARDWARE CTXT:
Fetch Pending 0x0 0
Eviction Pending 0x0 0
Queue Invalid No Desc Pending 0x1 1
Descriptors Pending 0x0 0
Credits Consumed 0x0 0
CIDX 0x0 0
CREDIT CTXT:
Credit 0x0 0
CMPT CTXT:
Interrupt Aggregation 0x1 1
Ring Index 0x0 0
Address Translation 0x0 0
Over Flow Check Disable 0x0 0
Full Update 0x0 0
Timer Running 0x0 0
Trigger Pending 0x0 0
Error 0x0 0
Valid 0x1 1
CIDX 0x0 0
PIDX 0x0 0
Descriptor Size 0x0 0
Base Address (High) 0x0 0
Base Address (Low) 0x2a898000 713654272
Ring Size 0x0 0
Color 0x1 1
Interrupt State 0x1 1
Timer Index 0x0 0
Counter Index 0x0 0
Function Id 0x0 0
Trigger Mode 0x1 1
Enable Interrupt 0x1 1
Enable Status Desc Update 0x1 1
PREFETCH CTXT:
Valid 0x1 1
Software Credit 0x5ff 1535
In Prefetch 0x0 0
Prefetch Enable 0x0 0
Error 0x0 0
Port Id 0x0 0
Buffer Size Index 0x0 0
Bypass 0x0 0
INTR CTXT:
at 0x0 0
pidx 0x0 0
page_size 0x0 0
baddr_4k (High) 0x0 0
baddr_4k (Low) 0x2a801000 713035776
color 0x1 1
int_st 0x0 0
vec 0x3 3
valid 0x1 1
total descriptor processed: 0
Dumped Queues 1 -> 2.
Dump Queue Descriptor Information¶
command: dma-ctl qdma<bbddf> q dump idx <N> [dir <h2c|c2h|bi>] [desc <x> <y>]
Dump the queue descriptor information
Parameters
- <N> : Queue number
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi)
- <x> : Range start index
- <y> : Range end index
[xilinx@]# dma-ctl qdma17000 q dump idx 0 dir h2c desc 1 10
qdma17000-ST-0 H2C online
1: 0x00000000cd4d039c 00000000 00000000 00000000 00000000
2: 0x000000009c6eaedf 00000000 00000000 00000000 00000000
3: 0x00000000389a56a7 00000000 00000000 00000000 00000000
4: 0x00000000b26186e9 00000000 00000000 00000000 00000000
5: 0x0000000005f26fbf 00000000 00000000 00000000 00000000
6: 0x00000000f887365d 00000000 00000000 00000000 00000000
7: 0x000000003dbbdb52 00000000 00000000 00000000 00000000
8: 0x000000007a05453d 00000000 00000000 00000000 00000000
9: 0x00000000cc734198 00000000 00000000 00000000 00000000
CMPL STATUS: 0x00000000377ea451 00000000 00000000
Dumped descs of queues 0 -> 0.
Dump Multiple Queue Descriptor Information¶
command: dma-ctl qdma<bbddf> q dump list idx <N> [dir <h2c|c2h|bi>] [desc <x> <y>]
Dumps the descriptor information for multiple queues
Parameters
- <start_idx> : Starting queue number
- <N> : Number of queues to dump
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi)
- <x> : Range start index
- <y> : Range end index
[xilinx@]# dma-ctl qdma17000 q dump list 1 2 dir h2c desc 1 10
qdma17000-ST-1 H2C online
1: 0x00000000c8f9ad60 00000000 00000000 00000000 00000000
2: 0x000000007c3c25fb 00000000 00000000 00000000 00000000
3: 0x000000000cc9e006 00000000 00000000 00000000 00000000
4: 0x00000000087702c3 00000000 00000000 00000000 00000000
5: 0x000000007619d32f 00000000 00000000 00000000 00000000
6: 0x000000002bb74438 00000000 00000000 00000000 00000000
7: 0x000000004f88c3b3 00000000 00000000 00000000 00000000
8: 0x0000000047737864 00000000 00000000 00000000 00000000
9: 0x000000004155d087 00000000 00000000 00000000 00000000
CMPL STATUS: 0x00000000ad836574 00000000 00000000
qdma17000-ST-2 H2C online
1: 0x0000000045751dc6 00000000 00000000 00000000 00000000
2: 0x00000000dd627761 00000000 00000000 00000000 00000000
3: 0x000000007f1bccd8 00000000 00000000 00000000 00000000
4: 0x0000000056d14ea0 00000000 00000000 00000000 00000000
5: 0x0000000038a8a630 00000000 00000000 00000000 00000000
6: 0x000000003c0b0083 00000000 00000000 00000000 00000000
7: 0x000000004a9bfbca 00000000 00000000 00000000 00000000
8: 0x000000003d056cdd 00000000 00000000 00000000 00000000
9: 0x00000000108760bc 00000000 00000000 00000000 00000000
CMPL STATUS: 0x000000000d8c788d 00000000 00000000
Dumped descs of queues 1 -> 2.
Dump Queue Completion Information¶
command: dma-ctl qdma<bbddf> q dump idx <N> [dir <h2c|c2h|bi>] [cmpt <x> <y>]
Dump the queue completion information. This command is valid only for streaming c2h.
Parameters
- <N> : Queue number
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi)
- <x> : Range start index
- <y> : Range end index
[xilinx@]# dma-ctl qdma17000 q dump idx 0 dir c2h cmpt 0 10
qdma17000-ST-0 C2H online
0: 0x0000000086ae1f7a 00000000 00000000
1: 0x0000000012caf472 00000000 00000000
2: 0x00000000ce16f6c6 00000000 00000000
3: 0x0000000030ac515a 00000000 00000000
4: 0x0000000008a11d76 00000000 00000000
5: 0x0000000006a465d9 00000000 00000000
6: 0x00000000cb70afc1 00000000 00000000
7: 0x00000000ccfe9e7c 00000000 00000000
8: 0x00000000757eff01 00000000 00000000
9: 0x000000007ad4593a 00000000 00000000
CMPL STATUS: 0x00000000973734af 00000000 00000000
Dumped descs of queues 0 -> 0.
Dump Multiple Queue Completion Information¶
command: dma-ctl qdma<bbddf> q dump list idx <N> [dir <h2c|c2h|bi>] [cmpt <x> <y>]
Dumps the completion information for multiple queues. This command is valid only for streaming c2h.
Parameters
- <start_idx> : Starting queue number
- <N> : Number of queues to list
- dir : Direction of the queue, host-to-card(h2c), card-to-host (c2h) or both (bi)
- <x> : Range start index
- <y> : Range end index
[xilinx@]# dma-ctl qdma17000 q dump list 1 2 dir c2h cmpt 0 10
qdma17000-ST-1 C2H online
0: 0x000000005e745eb2 00000000 00000000
1: 0x00000000c10487fb 00000000 00000000
2: 0x000000002c76c0b0 00000000 00000000
3: 0x000000005539c512 00000000 00000000
4: 0x00000000bf8aeb9c 00000000 00000000
5: 0x000000005ae055c9 00000000 00000000
6: 0x00000000c8ec4586 00000000 00000000
7: 0x000000009b833fb5 00000000 00000000
8: 0x000000001e812b8c 00000000 00000000
9: 0x0000000036bd937c 00000000 00000000
CMPL STATUS: 0x00000000b4ec91f7 00000000 00000000
qdma17000-ST-2 C2H online
0: 0x000000006c25b118 00000000 00000000
1: 0x000000004c4292df 00000000 00000000
2: 0x00000000dd0e4974 00000000 00000000
3: 0x00000000bf7da6cb 00000000 00000000
4: 0x000000004e38eef2 00000000 00000000
5: 0x00000000b5d7a04d 00000000 00000000
6: 0x000000002758e395 00000000 00000000
7: 0x00000000701f7830 00000000 00000000
8: 0x000000000e71a726 00000000 00000000
9: 0x00000000d45254b5 00000000 00000000
CMPL STATUS: 0x000000000e1bd43c 00000000 00000000
Dumped descs of queues 1 -> 2.
Dump the Interrupt Ring Information¶
command: dma-ctl qdma<bbddf> intring dump vector <N> <start_idx> <end_idx>
Dump the interrupt ring information
Parameters
- <N> : Vector number
- <start_idx> : Range start index
- <end_idx> : Range end index
[xilinx@]# dma-ctl qdma17000 intring dump vector 3 0 10
intr_ring_entry = 0: 0x00000000 0x00000000
intr_ring_entry = 1: 0x00000000 0x00000000
intr_ring_entry = 2: 0x00000000 0x00000000
intr_ring_entry = 3: 0x00000000 0x00000000
intr_ring_entry = 4: 0x00000000 0x00000000
intr_ring_entry = 5: 0x00000000 0x00000000
intr_ring_entry = 6: 0x00000000 0x00000000
intr_ring_entry = 7: 0x00000000 0x00000000
intr_ring_entry = 8: 0x00000000 0x00000000
intr_ring_entry = 9: 0x00000000 0x00000000
intr_ring_entry = 10: 0x00000000 0x00000000
Register Commands¶
Read a Register¶
command: dma-ctl qdma<bbddf> reg read bar <N> <addr>
Read a register value.
Parameters
- <N> : Bar number
- <addr> : Register address
[xilinx@]# dma-ctl qdma17000 reg read bar 2 0x0
qdma17000, 17:00.00, bar#2, 0x0 = 0x0.
Write a Register¶
command: dma-ctl qdma<bbddf> reg write bar <N> <addr>
Write a value to into the given register.
Parameters
- <N> : Bar number
- <addr> : Register address
[xilinx@]# dma-ctl qdma17000 reg write bar 2 0x0 0
qdma17000, 17:00.00, bar#2, reg 0x0 -> 0x0, read back 0x0.
Dump the function registers¶
command: dma-ctl qdma<bbddf> reg dump
This command allows the user to dump the DMA BAR and User BAR registers.
[xilinx@]# dma-ctl qdma17000 reg dump
################################################################################
### qdma17000, pci 17:00.00, reg dump
################################################################################
USER BAR #2
[ 0] ST_C2H_QID 0x1 1
[ 0x4] ST_C2H_PKTLEN 0x80 128
[ 0x8] ST_C2H_CONTROL 0 0
[ 0xc] ST_H2C_CONTROL 0 0
[ 0x10] ST_H2C_STATUS 0 0
[ 0x14] ST_H2C_XFER_CNT 0 0
[ 0x20] ST_C2H_PKT_CNT 0x1 1
[ 0x30] ST_C2H_CMPT_DATA_0 0 0
[ 0x34] ST_C2H_CMPT_DATA_1 0 0
[ 0x38] ST_C2H_CMPT_DATA_2 0 0
[ 0x3c] ST_C2H_CMPT_DATA_3 0 0
[ 0x40] ST_C2H_CMPT_DATA_4 0 0
[ 0x44] ST_C2H_CMPT_DATA_5 0 0
[ 0x48] ST_C2H_CMPT_DATA_6 0 0
[ 0x4c] ST_C2H_CMPT_DATA_7 0 0
[ 0x50] ST_C2H_CMPT_SIZE 0 0
[ 0x60] ST_SCRATCH_REG_0 0 0
[ 0x64] ST_SCRATCH_REG_1 0 0
[ 0x88] ST_C2H_PKT_DROP 0 0
[ 0x8c] ST_C2H_PKT_ACCEPT 0 0
[ 0x90] DSC_BYPASS_LOOP 0 0
[ 0x94] USER_INTERRUPT 0 0
[ 0x98] USER_INTERRUPT_MASK 0 0
[ 0x9c] USER_INTERRUPT_VEC 0 0
[ 0xa0] DMA_CONTROL 0 0
[ 0xa4] VDM_MSG_READ 0 0
CONFIG BAR #0
[ 0x0] CFG_BLOCK_ID_0 0x1fd30000 533921792
[ 0x4] CFG_BUSDEV_0 0x0 0
[ 0x8] CFG_PCIE_MAX_PL_SZ_0 0x51 81
[ 0xc] CFG_PCIE_MAX_RDRQ_SZ_0 0x52 82
[ 0x10] CFG_SYS_ID_0 0x1234 4660
[ 0x14] CFG_MSI_EN_0 0x2020202 33686018
[ 0x18] CFG_PCIE_DATA_WIDTH_0 0x3 3
[ 0x1c] CFG_PCIE_CTRL_0 0x1 1
[ 0x40] CFG_AXI_USR_MAX_PL_SZ_0 0x55 85
[ 0x44] CFG_AXI_USR_MAX_RDRQ_SZ_0 0x55 85
[ 0x4c] CFG_MISC_CTRL_0 0x10009 65545
[ 0x80] CFG_SCRATCH_REG_0 0x0 0
[ 0x84] CFG_SCRATCH_REG_1 0x0 0
[ 0x88] CFG_SCRATCH_REG_2 0x0 0
[ 0x8c] CFG_SCRATCH_REG_3 0x0 0
[ 0x90] CFG_SCRATCH_REG_4 0x0 0
[ 0x94] CFG_SCRATCH_REG_5 0x0 0
[ 0x98] CFG_SCRATCH_REG_6 0x0 0
[ 0x9c] CFG_SCRATCH_REG_7 0x0 0
[ 0xf0] QDMA_RAM_SBE_MSK_A_0 0xffffff11 4294967057
[ 0xf4] QDMA_RAM_SBE_STS_A_0 0x0 0
[ 0xf8] QDMA_RAM_DBE_MSK_A_0 0xffffff11 4294967057
[ 0xfc] QDMA_RAM_DBE_STS_A_0 0x0 0
[ 0x100] GLBL2_ID_0 0x1fd70000 534183936
[ 0x104] GLBL2_PF_BL_INT_0 0x41041 266305
[ 0x108] GLBL2_PF_VF_BL_INT_0 0x41041 266305
[ 0x10c] GLBL2_PF_BL_EXT_0 0x104104 1065220
[ 0x110] GLBL2_PF_VF_BL_EXT_0 0x104104 1065220
[ 0x114] GLBL2_CHNL_INST_0 0x30101 196865
[ 0x118] GLBL2_CHNL_QDMA_0 0x30f0f 200463
[ 0x11c] GLBL2_CHNL_STRM_0 0x30000 196608
[ 0x120] GLBL2_QDMA_CAP_0 0x800 2048
[ 0x128] GLBL2_PASID_CAP_0 0x0 0
[ 0x12c] GLBL2_FUNC_RET_0 0x0 0
[ 0x130] GLBL2_SYS_ID_0 0x0 0
[ 0x134] GLBL2_MISC_CAP_0 0x1000003 16777219
[ 0x1b8] GLBL2_DBG_PCIE_RQ_0 0x7f50003 133496835
[ 0x1bc] GLBL2_DBG_PCIE_RQ_1 0x6024 24612
[ 0x1c0] GLBL2_DBG_AXIMM_WR_0 0x600021 6291489
[ 0x1c4] GLBL2_DBG_AXIMM_WR_1 0x0 0
[ 0x1c8] GLBL2_DBG_AXIMM_RD_0 0x1 1
[ 0x1cc] GLBL2_DBG_AXIMM_RD_1 0x0 0
[ 0x204] GLBL_RNGSZ_0 0x801 2049
[ 0x208] GLBL_RNGSZ_1 0x41 65
[ 0x20c] GLBL_RNGSZ_2 0x81 129
[ 0x210] GLBL_RNGSZ_3 0xc1 193
[ 0x214] GLBL_RNGSZ_4 0x101 257
[ 0x218] GLBL_RNGSZ_5 0x181 385
[ 0x21c] GLBL_RNGSZ_6 0x201 513
[ 0x220] GLBL_RNGSZ_7 0x301 769
[ 0x224] GLBL_RNGSZ_8 0x401 1025
[ 0x228] GLBL_RNGSZ_9 0x601 1537
[ 0x22c] GLBL_RNGSZ_10 0xc01 3073
[ 0x230] GLBL_RNGSZ_11 0x1001 4097
[ 0x234] GLBL_RNGSZ_12 0x1801 6145
[ 0x238] GLBL_RNGSZ_13 0x2001 8193
[ 0x23c] GLBL_RNGSZ_14 0x3001 12289
[ 0x240] GLBL_RNGSZ_15 0x4001 16385
[ 0x248] GLBL_ERR_STAT_0 0x0 0
[ 0x24c] GLBL_ERR_MASK_0 0x90f 2319
[ 0x250] GLBL_DSC_CFG_0 0x35 53
[ 0x254] GLBL_DSC_ERR_STS_0 0x0 0
[ 0x258] GLBL_DSC_ERR_MSK_0 0x1f9023f 33096255
[ 0x25c] GLBL_DSC_ERR_LOG_0 0x0 0
[ 0x260] GLBL_DSC_ERR_LOG_1 0x0 0
[ 0x264] GLBL_TRQ_ERR_STS_0 0x0 0
[ 0x268] GLBL_TRQ_ERR_MSK_0 0xf 15
[ 0x26c] GLBL_TRQ_ERR_LOG_0 0x0 0
[ 0x270] GLBL_DSC_DBG_DAT_0 0x0 0
[ 0x274] GLBL_DSC_DBG_DAT_1 0x8080 32896
[ 0x27c] GLBL_DSC_ERR_LOG2_0 0x0 0
[ 0x288] GLBL_INTERRUPT_CFG_0 0x0 0
[ 0x400] TRQ_SEL_FMAP_0 0x0 0
[ 0x404] TRQ_SEL_FMAP_1 0x0 0
[ 0x408] TRQ_SEL_FMAP_2 0x0 0
[ 0x40c] TRQ_SEL_FMAP_3 0x0 0
[ 0x804] IND_CTXT_DATA_0 0x0 0
[ 0x808] IND_CTXT_DATA_1 0x0 0
[ 0x80c] IND_CTXT_DATA_2 0x0 0
[ 0x810] IND_CTXT_DATA_3 0x0 0
[ 0x814] IND_CTXT_DATA_4 0x0 0
[ 0x818] IND_CTXT_DATA_5 0x0 0
[ 0x81c] IND_CTXT_DATA_6 0x0 0
[ 0x820] IND_CTXT_DATA_7 0x0 0
[ 0x824] IND_CTXT_MASK_0 0xffffffff 4294967295
[ 0x828] IND_CTXT_MASK_1 0xffffffff 4294967295
[ 0x82c] IND_CTXT_MASK_2 0xffffffff 4294967295
[ 0x830] IND_CTXT_MASK_3 0xffffffff 4294967295
[ 0x834] IND_CTXT_MASK_4 0xffffffff 4294967295
[ 0x838] IND_CTXT_MASK_5 0xffffffff 4294967295
[ 0x83c] IND_CTXT_MASK_6 0xffffffff 4294967295
[ 0x840] IND_CTXT_MASK_7 0xffffffff 4294967295
[ 0x844] IND_CTXT_CMD_0 0x238 568
[ 0xa00] C2H_TIMER_CNT_0 0x1 1
[ 0xa04] C2H_TIMER_CNT_1 0x2 2
[ 0xa08] C2H_TIMER_CNT_2 0x4 4
[ 0xa0c] C2H_TIMER_CNT_3 0x5 5
[ 0xa10] C2H_TIMER_CNT_4 0x8 8
[ 0xa14] C2H_TIMER_CNT_5 0xa 10
[ 0xa18] C2H_TIMER_CNT_6 0xf 15
[ 0xa1c] C2H_TIMER_CNT_7 0x14 20
[ 0xa20] C2H_TIMER_CNT_8 0x19 25
[ 0xa24] C2H_TIMER_CNT_9 0x1e 30
[ 0xa28] C2H_TIMER_CNT_10 0x32 50
[ 0xa2c] C2H_TIMER_CNT_11 0x4b 75
[ 0xa30] C2H_TIMER_CNT_12 0x64 100
[ 0xa34] C2H_TIMER_CNT_13 0x7d 125
[ 0xa38] C2H_TIMER_CNT_14 0x96 150
[ 0xa3c] C2H_TIMER_CNT_15 0xc8 200
[ 0xa40] C2H_CNT_THRESH_0 0x40 64
[ 0xa44] C2H_CNT_THRESH_1 0x2 2
[ 0xa48] C2H_CNT_THRESH_2 0x4 4
[ 0xa4c] C2H_CNT_THRESH_3 0x8 8
[ 0xa50] C2H_CNT_THRESH_4 0x10 16
[ 0xa54] C2H_CNT_THRESH_5 0x18 24
[ 0xa58] C2H_CNT_THRESH_6 0x20 32
[ 0xa5c] C2H_CNT_THRESH_7 0x30 48
[ 0xa60] C2H_CNT_THRESH_8 0x50 80
[ 0xa64] C2H_CNT_THRESH_9 0x60 96
[ 0xa68] C2H_CNT_THRESH_10 0x70 112
[ 0xa6c] C2H_CNT_THRESH_11 0x80 128
[ 0xa70] C2H_CNT_THRESH_12 0x90 144
[ 0xa74] C2H_CNT_THRESH_13 0xa0 160
[ 0xa78] C2H_CNT_THRESH_14 0xb0 176
[ 0xa7c] C2H_CNT_THRESH_15 0xc0 192
[ 0xa88] C2H_STAT_S_AXIS_C2H_ACCEPTED_0 0x0 0
[ 0xa8c] C2H_STAT_S_AXIS_CMPT_ACCEPTED_0 0x0 0
[ 0xa90] C2H_STAT_DESC_RSP_PKT_ACCEPTED_0 0x0 0
[ 0xa94] C2H_STAT_AXIS_PKG_CMP_0 0x0 0
[ 0xa98] C2H_STAT_DESC_RSP_ACCEPTED_0 0x0 0
[ 0xa9c] C2H_STAT_DESC_RSP_CMP_0 0x0 0
[ 0xaa0] C2H_STAT_WRQ_OUT_0 0x0 0
[ 0xaa4] C2H_STAT_WPL_REN_ACCEPTED_0 0x0 0
[ 0xaa8] C2H_STAT_TOTAL_WRQ_LEN_0 0x0 0
[ 0xaac] C2H_STAT_TOTAL_WPL_LEN_0 0x0 0
[ 0xab0] C2H_BUF_SZ_0 0x1000 4096
[ 0xab4] C2H_BUF_SZ_1 0x100 256
[ 0xab8] C2H_BUF_SZ_2 0x200 512
[ 0xabc] C2H_BUF_SZ_3 0x400 1024
[ 0xac0] C2H_BUF_SZ_4 0x800 2048
[ 0xac4] C2H_BUF_SZ_5 0xf80 3968
[ 0xac8] C2H_BUF_SZ_6 0x1000 4096
[ 0xacc] C2H_BUF_SZ_7 0x1000 4096
[ 0xad0] C2H_BUF_SZ_8 0x1000 4096
[ 0xad4] C2H_BUF_SZ_9 0x1000 4096
[ 0xad8] C2H_BUF_SZ_10 0x1000 4096
[ 0xadc] C2H_BUF_SZ_11 0x1000 4096
[ 0xae0] C2H_BUF_SZ_12 0x1000 4096
[ 0xae4] C2H_BUF_SZ_13 0x2000 8192
[ 0xae8] C2H_BUF_SZ_14 0x233a 9018
[ 0xaec] C2H_BUF_SZ_15 0x4000 16384
[ 0xaf0] C2H_ERR_STAT_0 0x0 0
[ 0xaf4] C2H_ERR_MASK_0 0xfedb 65243
[ 0xaf8] C2H_FATAL_ERR_STAT_0 0x0 0
[ 0xafc] C2H_FATAL_ERR_MASK_0 0x7df1b 515867
[ 0xb00] C2H_FATAL_ERR_ENABLE_0 0x0 0
[ 0xb04] GLBL_ERR_INT_0 0x1002000 16785408
[ 0xb08] C2H_PFCH_CFG_0 0xc201100 203428096
[ 0xb0c] C2H_INT_TIMER_TICK_0 0x19 25
[ 0xb10] C2H_STAT_DESC_RSP_DROP_ACCEPTED_0 0x0 0
[ 0xb14] C2H_STAT_DESC_RSP_ERR_ACCEPTED_0 0x0 0
[ 0xb18] C2H_STAT_DESC_REQ_0 0x0 0
[ 0xb1c] C2H_STAT_DEBUG_DMA_ENG_0 0x0 0
[ 0xb20] C2H_STAT_DEBUG_DMA_ENG_1 0x80000000 2147483648
[ 0xb24] C2H_STAT_DEBUG_DMA_ENG_2 0xc0000000 3221225472
[ 0xb28] C2H_STAT_DEBUG_DMA_ENG_3 0x100000 1048576
[ 0xb2c] C2H_DBG_PFCH_ERR_CTXT_0 0x0 0
[ 0xb30] C2H_FIRST_ERR_QID_0 0x0 0
[ 0xb34] STAT_NUM_CMPT_IN_0 0x0 0
[ 0xb38] STAT_NUM_CMPT_OUT_0 0x0 0
[ 0xb3c] STAT_NUM_CMPT_DRP_0 0x0 0
[ 0xb40] STAT_NUM_STAT_DESC_OUT_0 0x0 0
[ 0xb44] STAT_NUM_DSC_CRDT_SENT_0 0x0 0
[ 0xb48] STAT_NUM_FCH_DSC_RCVD_0 0x0 0
[ 0xb4c] STAT_NUM_BYP_DSC_RCVD_0 0x0 0
[ 0xb50] C2H_CMPT_COAL_CFG_0 0x40064014 1074151444
[ 0xb54] C2H_INTR_H2C_REQ_0 0x0 0
[ 0xb58] C2H_INTR_C2H_MM_REQ_0 0x0 0
[ 0xb5c] C2H_INTR_ERR_INT_REQ_0 0x0 0
[ 0xb60] C2H_INTR_C2H_ST_REQ_0 0x0 0
[ 0xb64] C2H_INTR_H2C_ERR_MM_MSIX_ACK_0 0x0 0
[ 0xb68] C2H_INTR_H2C_ERR_MM_MSIX_FAIL_0 0x0 0
[ 0xb6c] C2H_INTR_H2C_ERR_MM_NO_MSIX_0 0x0 0
[ 0xb70] C2H_INTR_H2C_ERR_MM_CTXT_INVAL_0 0x0 0
[ 0xb74] C2H_INTR_C2H_ST_MSIX_ACK_0 0x0 0
[ 0xb78] C2H_INTR_C2H_ST_MSIX_FAIL_0 0x0 0
[ 0xb7c] C2H_INTR_C2H_ST_NO_MSIX_0 0x0 0
[ 0xb80] C2H_INTR_C2H_ST_CTXT_INVAL_0 0x0 0
[ 0xb84] C2H_STAT_WR_CMP_0 0x0 0
[ 0xb88] C2H_STAT_DEBUG_DMA_ENG_4_0 0x40000000 1073741824
[ 0xb8c] C2H_STAT_DEBUG_DMA_ENG_5_0 0x0 0
[ 0xb90] C2H_DBG_PFCH_QID_0 0x0 0
[ 0xb94] C2H_DBG_PFCH_0 0x0 0
[ 0xb98] C2H_INT_DEBUG_0 0x0 0
[ 0xb9c] C2H_STAT_IMM_ACCEPTED_0 0x0 0
[ 0xba0] C2H_STAT_MARKER_ACCEPTED_0 0x0 0
[ 0xba4] C2H_STAT_DISABLE_CMP_ACCEPTED_0 0x0 0
[ 0xba8] C2H_C2H_PAYLOAD_FIFO_CRDT_CNT_0 0x0 0
[ 0xbac] C2H_INTR_DYN_REQ_0 0x0 0
[ 0xbb0] C2H_INTR_DYN_MSIX_0 0x0 0
[ 0xbb4] C2H_DROP_LEN_MISMATCH_0 0x0 0
[ 0xbb8] C2H_DROP_DESC_RSP_LEN_0 0x0 0
[ 0xbbc] C2H_DROP_QID_FIFO_LEN_0 0x0 0
[ 0xbc0] C2H_DROP_PAYLOAD_CNT_0 0x0 0
[ 0xbc4] QDMA_C2H_CMPT_FORMAT_0 0x20001 131073
[ 0xbc8] QDMA_C2H_CMPT_FORMAT_1 0x0 0
[ 0xbcc] QDMA_C2H_CMPT_FORMAT_2 0x0 0
[ 0xbd0] QDMA_C2H_CMPT_FORMAT_3 0x0 0
[ 0xbd4] QDMA_C2H_CMPT_FORMAT_4 0x0 0
[ 0xbd8] QDMA_C2H_CMPT_FORMAT_5 0x0 0
[ 0xbdc] QDMA_C2H_CMPT_FORMAT_6 0x0 0
[ 0xbe0] C2H_PFCH_CACHE_DEPTH_0 0x10 16
[ 0xbe4] C2H_CMPT_COAL_BUF_DEPTH_0 0x10 16
[ 0xbe8] C2H_PFCH_CRDT_0 0x0 0
[ 0xe00] H2C_ERR_STAT_0 0x0 0
[ 0xe04] H2C_ERR_MASK_0 0x1f 31
[ 0xe08] H2C_FIRST_ERR_QID_0 0x0 0
[ 0xe0c] H2C_DBG_REG_0 0x0 0
[ 0xe10] H2C_DBG_REG_1 0x0 0
[ 0xe14] H2C_DBG_REG_2 0x0 0
[ 0xe18] H2C_DBG_REG_3 0x44008025 1140883493
[ 0xe1c] H2C_DBG_REG_4 0x0 0
[ 0xe20] H2C_FATAL_ERR_EN_0 0x0 0
[ 0xe24] H2C_REQ_THROT_0 0xc14000 12664832
[ 0xe28] H2C_ALN_DBG_REG0_0 0x0 0
[ 0x1004] C2H_MM_CONTROL_0 0x1 1
[ 0x1008] C2H_MM_CONTROL_1 0x1 1
[ 0x100c] C2H_MM_CONTROL_2 0x1 1
[ 0x1040] C2H_MM_STATUS_0 0x1 1
[ 0x1044] C2H_MM_STATUS_1 0x1 1
[ 0x1048] C2H_MM_CMPL_DSC_CNT_0 0x0 0
[ 0x1054] C2H_MM_ERR_CODE_EN_MASK_0 0x0 0
[ 0x1058] C2H_MM_ERR_CODE_0 0x0 0
[ 0x105c] C2H_MM_ERR_INFO_0 0x0 0
[ 0x10c0] C2H_MM_PERF_MON_CTRL_0 0x0 0
[ 0x10c4] C2H_MM_PERF_MON_CY_CNT_0 0x0 0
[ 0x10c8] C2H_MM_PERF_MON_CY_CNT_1 0x0 0
[ 0x10cc] C2H_MM_PERF_MON_DATA_CNT_0 0x0 0
[ 0x10d0] C2H_MM_PERF_MON_DATA_CNT_1 0x0 0
[ 0x10e8] C2H_MM_DBG_INFO_0 0x10002 65538
[ 0x10ec] C2H_MM_DBG_INFO_1 0x0 0
[ 0x1204] H2C_MM_CONTROL_0 0x1 1
[ 0x1208] H2C_MM_CONTROL_1 0x1 1
[ 0x120c] H2C_MM_CONTROL_2 0x1 1
[ 0x1240] H2C_MM_STATUS_0 0x1 1
[ 0x1248] H2C_MM_CMPL_DSC_CNT_0 0x0 0
[ 0x1254] H2C_MM_ERR_CODE_EN_MASK_0 0x0 0
[ 0x1258] H2C_MM_ERR_CODE_0 0x0 0
[ 0x125c] H2C_MM_ERR_INFO_0 0x0 0
[ 0x12c0] H2C_MM_PERF_MON_CTRL_0 0x0 0
[ 0x12c4] H2C_MM_PERF_MON_CY_CNT_0 0x0 0
[ 0x12c8] H2C_MM_PERF_MON_CY_CNT_1 0x0 0
[ 0x12cc] H2C_MM_PERF_MON_DATA_CNT_0 0x0 0
[ 0x12d0] H2C_MM_PERF_MON_DATA_CNT_1 0x0 0
[ 0x12e8] H2C_MM_DBG_INFO_0 0x10002 65538
[ 0x12ec] H2C_MM_REQ_THROT_0 0x8000 32768
[ 0x2400] FUNC_STATUS_0 0x44 68
[ 0x2404] FUNC_CMD_0 0xffffffff 4294967295
[ 0x2408] FUNC_INTR_VEC_0 0x0 0
[ 0x240c] TARGET_FUNC_0 0x4 4
[ 0x2410] INTR_CTRL_0 0x1 1
[ 0x2420] PF_ACK_0 0x10 16
[ 0x2424] PF_ACK_1 0x0 0
[ 0x2428] PF_ACK_2 0x0 0
[ 0x242c] PF_ACK_3 0x0 0
[ 0x2430] PF_ACK_4 0x0 0
[ 0x2434] PF_ACK_5 0x0 0
[ 0x2438] PF_ACK_6 0x0 0
[ 0x243c] PF_ACK_7 0x0 0
[ 0x2500] FLR_CTRL_STATUS_0 0x0 0
[ 0x2800] MSG_IN_0 0xffffffff 4294967295
[ 0x2804] MSG_IN_1 0xffffffff 4294967295
[ 0x2808] MSG_IN_2 0xffffffff 4294967295
[ 0x280c] MSG_IN_3 0xffffffff 4294967295
[ 0x2810] MSG_IN_4 0xffffffff 4294967295
[ 0x2814] MSG_IN_5 0xffffffff 4294967295
[ 0x2818] MSG_IN_6 0xffffffff 4294967295
[ 0x281c] MSG_IN_7 0xffffffff 4294967295
[ 0x2820] MSG_IN_8 0xffffffff 4294967295
[ 0x2824] MSG_IN_9 0xffffffff 4294967295
[ 0x2828] MSG_IN_10 0xffffffff 4294967295
[ 0x282c] MSG_IN_11 0xffffffff 4294967295
[ 0x2830] MSG_IN_12 0xffffffff 4294967295
[ 0x2834] MSG_IN_13 0xffffffff 4294967295
[ 0x2838] MSG_IN_14 0xffffffff 4294967295
[ 0x283c] MSG_IN_15 0xffffffff 4294967295
[ 0x2840] MSG_IN_16 0xffffffff 4294967295
[ 0x2844] MSG_IN_17 0xffffffff 4294967295
[ 0x2848] MSG_IN_18 0xffffffff 4294967295
[ 0x284c] MSG_IN_19 0xffffffff 4294967295
[ 0x2850] MSG_IN_20 0xffffffff 4294967295
[ 0x2854] MSG_IN_21 0xffffffff 4294967295
[ 0x2858] MSG_IN_22 0xffffffff 4294967295
[ 0x285c] MSG_IN_23 0xffffffff 4294967295
[ 0x2860] MSG_IN_24 0xffffffff 4294967295
[ 0x2864] MSG_IN_25 0xffffffff 4294967295
[ 0x2868] MSG_IN_26 0xffffffff 4294967295
[ 0x286c] MSG_IN_27 0xffffffff 4294967295
[ 0x2870] MSG_IN_28 0xffffffff 4294967295
[ 0x2874] MSG_IN_29 0xffffffff 4294967295
[ 0x2878] MSG_IN_30 0xffffffff 4294967295
[ 0x287c] MSG_IN_31 0xffffffff 4294967295
[ 0x2c00] MSG_OUT_0 0x0 0
[ 0x2c04] MSG_OUT_1 0x0 0
[ 0x2c08] MSG_OUT_2 0x0 0
[ 0x2c0c] MSG_OUT_3 0x0 0
[ 0x2c10] MSG_OUT_4 0x0 0
[ 0x2c14] MSG_OUT_5 0x0 0
[ 0x2c18] MSG_OUT_6 0x0 0
[ 0x2c1c] MSG_OUT_7 0x0 0
[ 0x2c20] MSG_OUT_8 0x0 0
[ 0x2c24] MSG_OUT_9 0x0 0
[ 0x2c28] MSG_OUT_10 0x0 0
[ 0x2c2c] MSG_OUT_11 0x0 0
[ 0x2c30] MSG_OUT_12 0x0 0
[ 0x2c34] MSG_OUT_13 0x0 0
[ 0x2c38] MSG_OUT_14 0x0 0
[ 0x2c3c] MSG_OUT_15 0x0 0
[ 0x2c40] MSG_OUT_16 0x0 0
[ 0x2c44] MSG_OUT_17 0x0 0
[ 0x2c48] MSG_OUT_18 0x0 0
[ 0x2c4c] MSG_OUT_19 0x0 0
[ 0x2c50] MSG_OUT_20 0x0 0
[ 0x2c54] MSG_OUT_21 0x0 0
[ 0x2c58] MSG_OUT_22 0x0 0
[ 0x2c5c] MSG_OUT_23 0x0 0
[ 0x2c60] MSG_OUT_24 0x0 0
[ 0x2c64] MSG_OUT_25 0x0 0
[ 0x2c68] MSG_OUT_26 0x0 0
[ 0x2c6c] MSG_OUT_27 0x0 0
[ 0x2c70] MSG_OUT_28 0x0 0
[ 0x2c74] MSG_OUT_29 0x0 0
[ 0x2c78] MSG_OUT_30 0x0 0
[ 0x2c7c] MSG_OUT_31 0x0 0
Dump detailed register info¶
command: dma-ctl qdma<BDF> reg info bar <N> <addr> [num_regs <M>]
For QDMA4.0 designs there is an additional option to print detailed breakdown of individual registers
[xilinx@]# dma-ctl qdma06000 reg info bar 0 0x00 num_regs 5
CFG_BLK_IDENTIFIER 0x0 0x1fd30001 533921793
CFG_BLK_IDENTIFIER [31,20] 0x1fd
CFG_BLK_IDENTIFIER_1 [19,16] 0x3
CFG_BLK_IDENTIFIER_RSVD_1 [15, 8] 0x0
CFG_BLK_IDENTIFIER_VERSION [ 7, 0] 0x1
CFG_BLK_PCIE_MAX_PLD_SIZE 0x8 0x51 81
CFG_BLK_IDENTIFIER [31, 7] 0x0
CFG_BLK_IDENTIFIER_1 [ 6, 4] 0x5
CFG_BLK_IDENTIFIER_RSVD_1 [ 3] 0x0
CFG_BLK_IDENTIFIER_VERSION [ 2, 0] 0x1
CFG_BLK_PCIE_MAX_READ_REQ_SIZE 0xc 0x52 82
CFG_BLK_IDENTIFIER [31, 7] 0x0
CFG_BLK_IDENTIFIER_1 [ 6, 4] 0x5
CFG_BLK_IDENTIFIER_RSVD_1 [ 3] 0x0
CFG_BLK_IDENTIFIER_VERSION [ 2, 0] 0x2
CFG_BLK_SYSTEM_ID 0x10 0xff01 65281
CFG_BLK_IDENTIFIER [31,17] 0x0
CFG_BLK_IDENTIFIER_1 [ 16] 0x0
CFG_BLK_IDENTIFIER_RSVD_1 [15, 0] 0xff01
CFG_BLK_MSIX_ENABLE 0x14 0xf 15
CFG_BLK_IDENTIFIER [31, 0] 0xf