SLR Assign

This is simple example to describe SLR assignment information for a platform design. This example highlights how to provide extra input to assign the logic of the kernel into a nominated SLR. In this example we are assigning first kernel(Vector Multiplication) to SLR0 and assigning the second kernel(Vector Addition) to SLR1

KEY CONCEPTS: SLR Assignments

KEYWORDS: slr

This example demonstrates how kernels can be assigned to different SLRs(Super Logic Region) during the kernel linking stage.

Actual kernel resource utilization values can be used to help distribute CUs across SLRs to reduce congestion in any one SLR. Xilinx recommends connecting to a DDR memory resource in the same SLR as the CU. This reduces competition for the limited SLR-crossing connection resources. In addition, connections between SLRs use super long line (SLL) routing resources, which incurs a greater delay than a standard intra-SLR routing.

It might be necessary to cross an SLR region to connect to a DDR resource in a different SLR. However, if both the and the directives are explicitly defined, the options sp, slr automatically add additional crossing logic to minimize the effect of the SLL delay, and facilitates better timing closure.

The explicit xlr assignment of kernels can be done using the slr option in the vmult_vadd.cfg file:

[connectivity]
slr=vmult_1:SLR1
slr=vadd_1:SLR1

EXCLUDED PLATFORMS:

  • Alveo U25 SmartNIC

  • Alveo U30

  • All Embedded Zynq Platforms, i.e zc702, zcu102 etc

  • All Versal Platforms, i.e vck190 etc

  • Samsung SmartSSD Computation Storage Drive

  • Samsung U.2 SmartSSD

  • X3 Compute Shell

  • All NoDMA Platforms, i.e u50 nodma etc

DESIGN FILES

Application code is located in the src directory. Accelerator binary files will be compiled to the xclbin directory. The xclbin directory is required by the Makefile and its contents will be filled during compilation. A listing of all the files in this example is shown below

src/host.cpp
src/kernel.cl

Access these files in the github repo by clicking here.

COMMAND LINE ARGUMENTS

Once the environment has been configured, the application can be executed by

./slr_assign <vmult_vadd XCLBIN>