Examples

Examples

• Vivado Accelerator Flow Example
  • Generate .bit.bin
  • Generate .xsa file
  • Generate .dtbo file
  • Create the shell.json file
  • Test on SOM Target
• Vitis Accelerator Flow Example: Replacing DPU with Filter2d Accelerator in a SmartCam Application
  • Obtaining Platform
  • Obtaining the filter2d Kernel
  • Altering Application/Overlay
  • Generate the Bitstream and .xclbin
  • Optional Steps to Generate shell.json and .dtbo file
  • Compile the Software on Ubuntu Target
  • Run Application on Target
• Vitis Platform Flow Example: Adding a Raspberry Pi Camera to SmartCam’s Platform
  • Prerequisites and Hardware Setup
  • Generating the Platform
    • Obtaining the Platform
    • Obtaining the isp_single IP
    • Importing the Raspberry Pi Pipeline
    • Updating the Block Design
    • Constraint File
    • Address Map
    • Lower the Clock Rate
    • Platform Setup
    • Validate the Design
    • Generate the Wrapper
    • Generate the Output Products
    • Generate the Bitstream
  • Creating the .dtsi File
    • Base Address
    • Interrupt
    • GPIO
    • I2C
    • AFI Ports
    • Bitstream File Name
    • Clock Frequency
    • Compile .dtsi to .dtbo
  • Installing Drivers on Ubuntu
  • Testing the Platform on Target
  • Exporting the Design
  • Adding the Accelerator
  • Test with the Accelerator on Target
• Example: Create a Platform for a Custom Carrier Card
  • Create a Vivado Design
    • Set Up the PS Connections
    • Set Up the Board Files
  • Next Steps
• Example - Generating DTSI and DTBO Overlay Files for SmartCam
  • Prerequisites
  • Generating the .dtsi File Based on the Platform .xsa File Using DTG
  • Modify the Generated pl.dtsi
    • Add the AP1302 Node
    • I2C MUX
    • mipi csi Mode
    • ZOCL Node
    • Final dtsi File
  • Compile the .dtsi to .dtbo Using DTC