UL3524 Ultra Low Latency Trading

Simulating a Reference Design

Overview

Details how to simulate a reference design using the provided waveform .wcfg file.

Instructions

Use the following steps to simulate the reference design:

1. Start Vivado and load the project (see Loading a Reference Design)

2. Select Simulation->Run Simulation from within Vivado.

This will:

• Start the Vivado simulator,

• Load the waveform .wcfg file and

• Display the selected signals.

1. Click on Run All

2. The simulation will run until completed.

Update the desired signals in the waveform and rerun as necessary.

Note: All reference designs come with a simulation waveform .wcfg file.

Next Steps

Next steps can include:

• Building a design

• Programming the device

Support

For additional documentation, please refer to the UL3524 product page and the UL3524 Lounge.

For support, contact your FAE or refer to support resources at: https://support.xilinx.com

_{Copyright © 2020–2023 Advanced Micro Devices, Inc}

^{Terms and Conditions}